1.1 本规范涵盖铝和铝合金挤压棒材、棒材、线材、型材和铝合金管( 注1 )和所示的脾气 表2 . 注1: 在本规范中 合金 一般来说，包括铝以及铝合金。 注2: 有关轧制或冷加工棒材，请参阅规范 B211/B211M ，用于压力应用中的拉制无缝管，规范 B210/B210M ，适用于结构管道，规范 B429/B429M ，对于无缝管和压力应用中使用的管，规范 B241/B241M . 注3: 本规范中列出的管道产品适用于一般用途。本规范可能不涉及涉及压力的流体输送应用所需的制造工艺、完整性测试和验证。 见规范 B210/B210M , B241/B241M ，或适用于无缝管和用于涉及压力的流体输送应用的管道。见规范 B234M ，适用于表面冷凝器、蒸发器和热交换器。 1.2 合金和回火名称符合ANSI H35.1/H35.1M。等效的统一编号系统合金名称为 表1 例如，根据惯例，A91100前面带有A9，用于铝1100 E527 . 1.3 有关本规范中包含新铝和铝合金的验收标准，请参阅 附件A2 . 1.4 本规范是规范的公制对应项 B221页 . 1.5 SI中规定的值应视为标准值。本规范不包括其他计量单位。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers aluminum and aluminum-alloy extruded bars, rods, wires, profiles, and tubes in the aluminum alloys ( Note 1 ) and tempers shown in Table 2 . Note 1: Throughout this specification the use of the term alloy in the general sense includes aluminum as well as aluminum alloy. Note 2: For rolled or cold-finished bars and rods refer to Specification B211/B211M , for drawn seamless tube used in pressure applications, Specification B210/B210M , for structural pipe and tube, Specification B429/B429M , and for seamless pipe and tube used in pressure applications, Specification B241/B241M . Note 3: Pipe and tube products listed in this specification are intended for general purpose applications. This specification may not address the manufacturing processes, integrity testing, and verification required for fluid-carrying applications involving pressure. See Specification B210/B210M , B241/B241M , or both as appropriate for seamless pipe and tube used in fluid-carrying applications involving pressure. See Specification B234M , as appropriate, for use in surface condensers, evaporators, and heat exchangers. 1.2 Alloy and temper designations are in accordance with ANSI H35.1/H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for Aluminum 1100 in accordance with Practice E527 . 1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2 . 1.4 This specification is the metric counterpart of Specification B221 . 1.5 The values stated in SI are to be regarded as standard. No other units of measurement are included in this specification. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.