BS ISO 16063-45:2017规定了内置校准线圈的振动传感器的校准 实验室和现场。在实验室中，所述方法可用于校准振动 灵敏度和电灵敏度，并获得校准线圈的系数。在原位，它可以 用于使用电气仪表校准电气灵敏度和振动灵敏度。本文件规定了执行振动校准的仪器和程序 带有内置校准线圈的传感器，频率范围通常为0.1 Hz至100 Hz。扩展不确定度可使用本文件中给出的方法进行评估。交叉引用:ISO 16063-1:1998 ISO 16063-21:2003ISO 2041:2009 Ed 3ISO 16063-11:1999（R10）ISO 266:1997ISO/TS 10811-1:2000ISO/TS 10811-2:2000ISO/IEC指南98-3:2008 Ed 1购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 16063-45:2017 specifies the calibration of vibration transducers with built-in calibration coils in laboratory and in situ. In laboratory, the method described can be applied to calibrate the vibration sensitivity and electrical sensitivity, and to obtain the coefficient of calibration coil. In situ, it can be used to calibrate the electrical sensitivity and vibration sensitivity using electrical instrumentation.This document specifies the instrumentation and procedure for performing calibrations of vibration transducers with built-in calibration coils in the frequency range typically from 0,1 Hz to 100 Hz.The expanded uncertainty can be evaluated using the method given in this document.Cross References:ISO 16063-1:1998 ISO 16063-21:2003ISO 2041:2009 Ed 3ISO 16063-11:1999 (R10)ISO 266:1997ISO/TS 10811-1:2000ISO/TS 10811-2:2000ISO/IEC GUIDE 98-3:2008 Ed 1All current amendments available at time of purchase are included with the purchase of this document.