1.1本性能规范涵盖了用于制造新室内家具的平纹、簇绒或植绒机织室内装饰织物的性能要求。对于每个织物方向相关的因素，这些要求适用于经纱和填充方向。 1.2本性能规范不适用于门廊、甲板或草坪家具中使用的织物；也不适用于针织物、粘合或层压织物或表面涂层织物（如乙烯基和聚氨酯）。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 用于该最终用途的织物应满足表1中列出的所有要求。 应该认识到，织物可以利用几乎无限数量的结构变量组合（例如，纤维类型、纤维百分比、纱线捻度、纱线数量、经纱和纬纱数量、化学和机械加工）生产。此外，时尚或美学要求最终消费者可能会发现由不符合表1中所有要求的织物制成的可接受物品。 因此，没有任何单一的性能规范可能适用于可用于此最终用途的所有各种织物。 特定性能和测试方法的用途和意义在规定测试方法的适当章节中进行了讨论。

1.1 This performance specification covers the performance requirements for plain, tufted, or flocked woven upholstery fabrics as used in the manufacture of new indoor furniture. These requirements apply to both the warp and filling directions for those factors where each fabric direction is pertinent. 1.2 This performance specification is not applicable to fabrics used in porch, deck, or lawn furniture; nor for knitted fabrics, bonded or laminated fabrics, or surface-coated fabrics (such as vinyls and urethanes). 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== Fabrics intended for this end-use should meet all of the requirements listed in Table 1. It should be recognized that fabrics can be produced utilizing an almost infinite number of combinations of construction variables ( e.g., type of fibers, percentage of fibers, yarn twist, yarn number, warp and pick count, chemical and mechanical finished). Additionally, fashion or aesthetics dictate that the ultimate consumer may find acceptable articles made from fabrics that do not conform to all of the requirements in Table 1. Hence, no single performance specification can possibly apply to all the various fabrics that could be utilized for this end-use. The uses and significance of particular properties and test methods are discussed in the appropriate section of the specified test methods.