1.1 这些试验方法涵盖了用于安装固定滞留空心金属视觉系统和各种材料和结构类型的门组件的锚固系统。这些锚定系统用于在拘留所和教养所的墙壁开口中安装固定的中空金属视觉系统和门组件，用于监禁囚犯。 1.2 锚固系统根据这些试验方法研究的单个部件包括安全中空金属框架、框架锚固、安全玻璃、面板和可拆卸玻璃挡块。 1.3 这些测试方法旨在测试用于安装固定滞留空心金属视觉系统或门组件的锚固系统防止、延迟和阻碍逃生的能力；限制或控制对未经授权或安全区域的访问；防止违禁品通过。 1.4 这些测试方法主要适用于用于在拘留/教养设施内通常存在的安全区域之间安装拘留中空金属视觉系统或门组件的锚固系统，例如:休息室、控制室、牢房和sally ports。 只要遵循测试和报告程序，这些测试方法适用于用于安装视觉系统和门组件（空心金属除外）的锚固系统。 1.5 以英寸-磅为单位的数值应视为标准值。括号中给出的值仅供参考。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 惩戒管理官员的一个主要担忧是拘留/惩戒设施中使用的安全屏障对某些类型的人身攻击的抵抗力，这在现场是合理的。 这些测试方法旨在帮助确定用于安装固定滞留空心金属视觉系统和门组件的锚固系统的物理安全等级。 4.2 这些测试方法不用于测量耐腐蚀剂、高能步枪、炸药、锯切或其他此类方法的攻击性。这些测试方法旨在评估视觉系统对使用殴打设备（如长椅、床铺、灭火器或桌子）的暴力攻击的抵抗力；手枪达到并包括。 44万能；以及使用床垫、书籍和类似易燃材料引发的火灾。 4.3 本标准的主要目的或结果是提供详细的测试方法，近似于视觉系统和车门总成锚固系统在现场可能受到的滥用程度。使用它的预期结果是，在发生此类袭击时，确保公众、监狱管理人员和囚犯本人得到保护。 注1: 建议拘留/教养设施管理部门提供足够的培训、监督和预防性维护计划，以使空心金属视觉系统在整个预期使用寿命内按预期运行。

1.1 These test methods cover anchor systems used for the installation of fixed detention hollow metal vision systems and door assemblies of various materials and types of construction. These anchor systems are used to install fixed hollow metal vision systems and door assemblies in wall openings in detention and correctional institutions designed to incarcerate inmates. 1.2 Anchor systems individual components investigated under these test methods include detention security hollow metal frames, frame anchoring, security glazing, panels, and removable glazing stops. 1.3 These test methods are designed to test the capability of anchor systems used to install a fixed detention hollow metal vision system or door assembly to prevent, delay, and frustrate escape; to limit or control access to unauthorized or secured areas; and prevent passage of contraband. 1.4 These test methods apply primarily to anchor systems used to install detention hollow metal vision systems or door assemblies between secure areas generally found inside a detention/correctional facility such as: day rooms, control rooms, cells, and sally ports. These test methods are applicable to anchor systems used to install vision systems and door assemblies other than hollow metal, provided testing and reporting procedures are followed. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 A major concern for corrections administration officials is the resistance of security barriers used in detention/correctional facilities to certain types of physical attack that it is reasonable to expect in the field. These test methods are designed to aid in identifying a level of physical security for anchor systems used to install fixed detention hollow metal vision systems and door assemblies. 4.2 These test methods are not intended to measure resistance to attack by corrosive agents, high-powered rifles, explosives, sawing, or other such methods. These test methods are intended to evaluate the resistance of a vision system to violent attacks using battering devices such as benches, bunks, fire extinguishers, or tables; hand guns up to and including the.44 magnum; and fires started by using mattresses, books, and similar flammable materials. 4.3 The primary purpose or result of this standard is to provide detailed test methods that approximate the levels of abuse to which it is possible that vision system and door assembly anchor systems become subjected in the field. The desired result of its use is to give ensurance of protection to the public, to prison administrative personnel, and to the inmates themselves in the event of such attack. Note 1: It is recommended that detention/correctional facility administration provide adequate training, supervision, and preventive maintenance programs to enable hollow metal vision systems to function as intended throughout the expected service life.