列出了加拿大和联合国的文件。为了语法、清晰性和最新语言，对整个文档进行了复制编辑。增加了白色光度要求的图3。头衔调整了。§2.2:增加了SAE J2040和J2261。增加了联合国出版物。FMCSA出版物的更新标题及其各自的可用性。增加了加拿大出版物。增加了TTMA出版物。§3:根据其他SAE标准的最新实践，将光功能定义与灯具/设备定义分开。增加了“端部轮廓标志灯”名称，作为示廓灯的替代术语。为清晰起见，进行了文字编辑。§3.6:规定识别灯在三件一组的情况下彼此基本相同:确认识别灯作为三件一组的独特要求，将长期的行业惯例正式化，并抵制将识别灯误用为时尚玩具的诱惑。 §5.1和6.1:为清晰起见进行了文案编辑。§6.2:添加白色作为前示廓灯和前识别灯的可选颜色，以与国际惯例保持一致，并与北美惯例保持一致（请注意，截至本文件发布之日，F/CMVSS–108要求这些功能使用黄色）。§6.4:为清晰起见进行了文字编辑。增加了6.4.1和6.4.3.1，规定了多功能灯的操作模式。6.4.3.1:增加术语“光学”。§6.4.8:更新了适用于所有光源的语言，而不仅仅适用于带索引底座的灯丝灯泡。§6.5:为清晰起见进行了文字编辑。§6.5.2:对公制转换误差进行修正；38.1厘米的校正值相当于之前的15英寸（英制单位）要求。§7.1:为了清晰和消除歧义，进行了文字编辑。增加7。 1.2，注意应急和特殊服务车辆的特殊安装指南。

Canadian and UN documents listed. Entire document copyedited for grammar, clarity, and up-to-date language. Added Figure 3 for white photometric requirements. Title adjusted.§ 2.2: Added SAE J2040 & J2261. Added UN publications. Updated title and their respective availability of FMCSA publication. Added Canadian publications. Added TTMA publication.§ 3: Separated light function definitions from lamp/device definitions in accordance with recent practice in other SAE Standards. Added "end-outline marker lamp" designation as an alternative term for clearance lamp. Copyedited for clarity.§ 3.6: Stipulated that identification lamps are to appear substantially identical to one another in their group of three: to formalize a longstanding industry practice, in recognition of the ID lamps' unique required aspect of being a group of three devices, and to weigh against temptation to misuse identification lamps as style/fashion toys.§ 5.1 and 6.1: Copyedited for clarity.§ 6.2: White added as an optional color for front clearance and front identification lamps, for alignment with international practice and for consistency in North American practice (with note that as of this document's publication date, F/CMVSS № 108 require yellow for these functions).§ 6.4: Copyedited for clarity. Added 6.4.1 and 6.4.3.1 stipulating operational modes for multifunction lamps.6.4.3.1: Added term "optically".§ 6.4.8: Updated with language that applies to all light sources, rather than just to filament bulbs with indexed bases.§ 6.5: Copyedited for clarity.§ 6.5.2: Correction made for metric conversion error; The corrected value of 38.1 cm is equivalent to the former 15 inch (English unit) requirement.§ 7.1: Copyedited for clarity and to remove ambiguity. Added 7.1.2, noting special installation guidelines for emergency and special-service vehicles.