BS ISO 2135:2017规定了一种加速试验方法，用于使用人造光评估铝及其合金上彩色阳极氧化涂层的牢度。为了评估外部暴露的耐光性，只有在与实际使用条件相当的条件下，户外暴露才是完全令人满意的。加速试验适用于彩色阳极氧化涂层的质量控制试验，其耐光性数值已通过户外暴露试验确定。本方法适用于以任何方式和目的生产的铝及其合金上的彩色阳极氧化涂层。然而，该方法不适用于通过户外暴露试验确定的耐光性值小于6的彩色涂层的测量。 交叉引用:ISO 4582:2017ISO 7583:2013 ED2ASTM G155-13ISO 4892-4:2013 ED3ISO 105-A02:1993 Ed 1ISO 7668:2010 Ed 2ISO 4892-2:2013 ED3ISO 16474-2:2013 ED1ISO 16474-4:2013 ED1ISO 105-B02:2014ASTM G153-13ISO 105-B01:2014购买本文件时可提供的所有当前修订版。

BS ISO 2135:2017 specifies an accelerated test method for assessing the fastness, using artificial light, of coloured anodic oxidation coatings on aluminium and its alloys.For evaluating light fastness on exterior exposure, only outdoor exposure under conditions comparable with actual service is completely satisfactory.Accelerated testing is suitable as a quality-control test of coloured anodic oxidation coatings whose light fastness number has already been established by means of outdoor exposure testing.The method is applicable to coloured anodic oxidation coatings on aluminium and its alloys produced by any means and for any purpose.However, the method is not suitable for the measurement of coloured coatings with a light fastness number already established by means of outdoor exposure testing and of less than 6.Cross References:ISO 4582:2017ISO 7583:2013 ED2ASTM G155 - 13ISO 4892-4:2013 ED3ISO 105-A02:1993 Ed 1ISO 7668:2010 Ed 2ISO 4892-2:2013 ED3ISO 16474-2:2013 ED1ISO 16474-4:2013 ED1ISO 105-B02:2014ASTM G153 - 13ISO 105-B01:2014All current amendments available at time of purchase are included with the purchase of this document.