BS EN 17110:2018涵盖了用于控制蒸汽排放的蒸汽歧管排气阀 多方面的空气。它规定了蒸汽歧管排气阀的性能要求和关键尺寸。信息技术 还规定了验证设备是否符合本文件要求所需的测试。本文件规定的服务设备适用于液体石油产品和 ADR[1]第3类的其他危险物质，其蒸汽压力在以下条件下不超过110 kPa: 50°C和汽油，且无有毒或腐蚀性分类。交叉引用:EN 12266-2:2012EN 12266-1:2012EN 14564ISO 2859-1IEC 60529EN 60529EN 16522购买本文件时可用的所有现行修订版均包含在购买本文件中。

BS EN 17110:2018 covers the vapour manifold vent valve used to provide controlled venting of the vapour manifold to atmosphere.It specifies the performance requirements and the critical dimensions of the vapour manifold vent valve. It also specifies the tests necessary to verify compliance of the equipment with this document.The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [1] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.Cross References:EN 12266-2:2012EN 12266-1:2012EN 14564ISO 2859-1IEC 60529EN 60529EN 16522All current amendments available at time of purchase are included with the purchase of this document.