IEC TR 63037:2019作为IEC TR 63037:2019 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC TR 63037:2019为controlgear/集成灯设计师开发适用于未来相位切割调光器的产品提供了指导。它描述了控制装置/集成灯的可能电压信号和预期响应。本文件描述了在相位截止照明系统的所有操作状态下controlgear的预期响应，并提供了对相位截止调光器要求的完整理解。IEC 60669-2中描述了相位截止调光器的响应？1:-，附件EE。本文件规定了电源电压相控制的系统性能方面和测试程序-由市电电压相位截止调光器控制的市电操作的电子照明设备的亮度的截止调光，例如LED集成灯和带有外部控制装置的光源。本文件未涵盖安全要求，但由各自的产品标准涵盖。这第二版取消并取代了2016年出版的第一版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更: -可听噪声的发射； -由与调光器的电源或同步无关的问题引起的重影； -相位角波形的稳定性(用于调光器)，包括对称性和稳定性测试； -轻负载的闪烁； -重复振铃电压； -调光范围；和 -增加了开关周期的数量。

IEC TR 63037:2019 is available as IEC TR 63037:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC TR 63037:2019 provides guidance to controlgear/integrated lamp designers for the development of products suitable to operate with future phase-cut dimmers. It describes the possible voltage signals and the expected response of the controlgear/integrated lamps. This document describes the expected response of controlgear during all operation states of a phase-cut lighting system and provides a complete understanding of the requirements for phase-cut dimmers. The response of a phase-cut dimmer is described in IEC 60669-2？1:—, Annex EE. This document specifies the system performance aspects and test procedures for the control by mains voltage phase-cut dimming of the brightness of mains operated electronic lighting equipment intended to be controlled by mains voltage phase-cut dimmers, such as LED integrated lamps and light sources with external controlgear. Safety requirements are not covered by this document, but by respective product standards. This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- emission of audible noise;
- ghosting caused by issues that are not related to the power supply of the dimmer or synchronization;
- stability of phase angle waveform (for the dimmer), including symmetry and stability tests;
- flicker of light loads;
- repetitive ring up voltage;
- dimming range; and
- number of switching cycles have been added.