为了对单轴测试系统进行动态校准，有必要测量试件承受的力，使其达到已知的精度水平；该测量由动态校准装置（DCD）代替试样进行，校准方法见ISO 4965-1。ISO 4965-2:2012定义了DCD仪器的校准程序。还描述了分析结果的方法，从而得出一系列测试频率，根据ISO 4965-1，仪器可在该频率范围内与DCD一起使用。

In order to perform a dynamic calibration of a uniaxial testing system, it is necessary to measure the forces experienced by the test-piece to known levels of accuracy; this measurement is made by a dynamic calibration device (DCD) in place of the test-piece and the calibration method is described in ISO 4965-1. ISO 4965-2:2012 defines the calibration procedure for the DCD's instrumentation. The method for the analysis of the results is also described, leading to a range of testing frequencies over which the instrumentation is valid for use with DCDs in accordance with ISO 4965-1.