本文件规定了核电厂主控制室的人机界面要求。本文件还规定了功能选择、设计考虑和人机界面组织的要求，以及系统地用于验证和验证功能设计的程序。如IAEA SSR-2/1和IAEA NP-T-3.16所定义，这些要求反映了人因工程原理在核电厂运行状态和事故条件（包括设计依据和设计扩展条件）期间适用于人机界面时的应用。本文件不包括特殊用途或通常无人看管的情况 控制点，例如从主控制室外部为停堆操作或放射性废物处理或应急响应设施提供的控制点。 详细的设备设计不在本文件的范围内。交叉引用:EN 60709EN ISO 11064系列IEC 62645IEC 60960ISO 11064IEC 62859IEC 61771EN 61513IEC 62003EN 61227IEC 61227IEC 61226EN 61772EN 60780-323IEC 60980IEC 60671EN 6224IAEA NS-G-1.9IEC 60965IEC 61839IAEA NS-G-1.11IEC 61513EN 60671IEC 60709IEC 61225EN 61226IAEA NP-T-3.16EN 60965IEC/IEEE 60780-323IEC 62646IEC 61772EN 61839IAEA安全术语表:2016IAEA SS954IECSSR-2/1:2012包含以下内容:修订，2019年7月

This document establishes requirements for the human-machine interface in the main control rooms of nuclear power plants. The document also establishes requirements for the selection of functions, design consideration and organization of the human-machine interface and procedures which are used systematically to verify and validate the functional design. These requirements reflect the application of human factors engineering principles as they apply to the human-machine interface during plant operational states and accident conditions (including design basis and design extension conditions), as defined in IAEA SSR-2/1 and IAEA NP-T-3.16. This document does not cover special purpose or normally unattended control points, such as those provided for shutdown operations from outside the main control room or for radioactive waste handling, or emergency response facilities. Detailed equipment design is outside the scope of this document.Cross References:EN 60709EN ISO 11064 seriesIEC 62645IEC 60960ISO 11064IEC 62859IEC 61771EN 61513IEC 62003EN 61227IEC 61227IEC 61226EN 61772EN 60780-323IEC 60980IEC 60671EN 62241IAEA NS-G-1.9IEC 60965IEC 61839IAEA NS-G-1.11IEC 61513EN 60671IEC 60709IEC 61225EN 61226IAEA NP-T-3.16EN 60965IEC/IEEE 60780-323IEC 62241IEC 62646IEC 61772EN 61839IAEA Safety Glossary:2016IAEA SSG-39IEC 62954IAEA SSR-2/1:2012Incorporates the following:Amendment, July 2019