BS 4873:2016规定了铝合金窗和外部行人门的设计、构造和性能要求，包括组成材料和玻璃，包括热改进或非热改进。本英国标准不适用于BS 8529中定义的复合门套，但它确实涵盖了主要为铝框（门楣和栏杆结构）且带有可更换复合板的门套。本英国标准适用于工厂制造的窗户和门套，这些窗户和门套将垂直（±15°）安装在建筑物的外表面，作为单个或多个窗户和门套- 以下类型的照明装置或耦合组件（如适用）:窗户:铰链式:侧挂、上挂、下挂、转弯前倾斜或转弯前倾斜；突出部分:侧挂和顶挂（包括可翻转窗户）；旋转:水平和垂直；滑动:水平和垂直（包括窗扇向垂直方向倾斜）；固定灯；固定窗；平行开口；双开法式平开窗；百叶窗，可调节；门套:单扇、单扇或双扇铰链门或旋转门 或者没有侧灯和顶灯；双叶，单叶- 旋转门或双旋转铰链门或旋转门 或者没有侧灯和顶灯；滑动门（包括倾斜和滑动门以及提升和滑动门）；滑动折叠门。本英国标准适用于装有平开窗或窗扇框架的窗户 构件长度不超过3m，且其中没有门扇框架构件 超过3.5米。本英国标准不适用于 跨越楼层的水平结构构件，但适用于 安装在幕墙系统内的窗户或门套。本英国标准不适用于用于转换的辅助窗 将现有的单窗口转换为双窗口或耦合窗口。注:合格评定指南见附录A。合格评定指南 参考参考:BS 3987BS（B 3987B B 4255）B B B B B B B B B B B B B B B B B B B B B B B B B B B S 6100-6 B B B 6100-6 6 B B B B 6100-6 B B B B 6100-6 B B B 6100-6 B B B B 6100-6 B B B B B B B B B B 6100-6 B B 6100-6 B B B B 6100-6 10 10 10 10 10 10-10 10 10-6 B B B B B B B B B B B B B 6100-10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B 6100-10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B 611BS EN 12519BS EN 13141-1BS EN13142BS EN ISO 7599BS EN ISO 9227BS EN ISO 11600BS 644BS 1186- 2BS 8213-1BS 8213-4BS 8220BS EN 755-1BS EN 942BS EN 13126BS EN 14024BS EN 14351-1+A1:2010DD 845589/106/EECAll购买本文件时提供的当前修订包括在购买本文件中。

BS 4873:2016 specifies requirements for the design, construction and performance of aluminium alloy windows and external pedestrian doorsets, thermally or non-thermally improved, including constituent materials and glazing.This British Standard does not apply to composite doorsets as defined in BS 8529, but it does cover doorsets that are predominantly aluminium framed (stile and rail construction) with replaceable composite panels.This British Standard applies to windows and doorsets fabricated in a factory, to be installed vertically (±15°) into the external face of buildings, as single or multi-light units, or in coupled assemblies where appropriate, of the following types:windows:hinged: side-hung, top-hung, bottom-hung, tilt before turn or turn before tilt;projecting: side-hung and top-hung (including reversible windows);pivoted: horizontal and vertical;sliding: horizontal and vertical (including tilting-in sash to vertical);fixed lights;fixed casement;parallel opening;double opening French casement;louvred, adjustable;doorsets:single leaf, single-swing or double-swing hinged or pivoted doors with or without side lights and top lights;double leaf, single-swing or double-swing hinged or pivoted doors with or without side lights and top lights;sliding doors (includes tilt and slide and lift and slide doors);sliding folding doors.This British Standard is applicable to windows in which a casement or sash frame member is no longer than 3 m and in which a door leaf frame member is no longer than 3.5 m. This British Standard does not apply to curtain walls that span across horizontal structural members of floors, but it is applicable to windows or doorsets fitted within a curtain walling system.This British Standard is not applicable to secondary windows applied to convert existing single windows into double or coupled windows.NOTE Guidance on the evaluation of conformity is given in Annex A. Guidance on durability and recycling is given in Annex B.Cross References:BS 3987BS 4255-1BS 4842BS 6100-1BS ISO 6707-1BS 6100-6BS 6100-11BS 6100-12BS 6262-1BS 6262-2BS 6262-3BS 6262-4BS 6262-7BS 6375-1BS 6375-2BS 6375-3BS 6496BS 8000-7BS EN 485-2:2013BS EN 755-2:2013BS EN 755-9:2008BS EN 1279BS EN 1670BS EN 1991-1-4BS EN 12020-1:2008BS EN 12020-2:2008BS EN 12206-1BS EN 12365-1BS EN 12519BS EN 13141-1BS EN 13142BS EN ISO 7599BS EN ISO 9227BS EN ISO 11600BS 644BS 1186-2BS 8213-1BS 8213-4BS 8220BS EN 755-1BS EN 942BS EN 13126BS EN 14024BS EN 14351-1+A1:2010DD 845589/106/EECAll current amendments available at time of purchase are included with the purchase of this document.