橡胶膜片式稳压阀技术条件
Specifications for rubber diaphragm pressure regulator

2002-01-24

城镇燃气调压器用橡胶膜片
Rubber diaphragm for city gas pressure regulators

2017-12-29

Шины с регулируемым давлением. Технические условия
规定压力的轮胎 规格

带弹簧管压力表的气体减压器校准规范
Calibration Specification for Pressure Regulators with Bourdon Tube Pressure Gauge

2011-12-28

Регуляторы давления для сжиженных углеводородных газов на давление до 1,6 МПа. Общие технические условия
压力为1.6MPa的液化氢气压力调节器 一般规格

1994-10-21

液体火箭发动机压力调节器能用规范
General specification for pressure regulator of liquid rocket engine

2011-07-19

Арматура трубопроводная. Регуляторы давления квартирные. Общие технические условия
管道阀门家庭监管者的压力 一般规格

REGULATOR AIR PRESSURE, AIRCRAFT CABIN, GENERAL SPECIFICATION FOR
机舱气压调节器通用规范

1997-07-23

REGULATOR AIR PRESSURE, AIRCRAFT CABIN, GENERAL SPECIFICATION FOR
飞机座舱气压调节器通用规范

1954-02-17

压水堆核电厂反应堆压力容器金属保温层技术条件
Specification for reactor pressure vessel metal insulation for pressurized water reactor nuclear power plants

2001-02-28

Pressure equipment-Inspection documentation of metallic materials and compliance with the material specification
压力设备

2015-01-31

汽车与挂车 气压调节保护装置 技术要求及台架试验方法
Automobile and trailer - Specifications and test methods of bench for pressure regulator and protector

2015-07-14

Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
气瓶 带有集成压力调节器的气缸阀 规范和型式试验

2013-03-31

Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing
气瓶.带集成压力调节器的气瓶阀.规范和型式试验

2024-03-21

Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)
黑色金属对接接头闪光焊接规范（不包括压力管道应用）

1988-09-30

REGULATOR, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE-BREATHING, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
自动加压呼吸氧气稀释器调节器通用规范（无S/S文件）

1990-11-26

REGULATOR, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE-BREATHING, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT)
自动加压呼吸氧气稀释器调节器通用规范（无S/S文件）

1990-11-26

Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
压力容器板 碳钢 玻璃或扩散金属涂层的锰 - 钛的标准规范

2021-03-01

Air line filter, regulator and/or lubricator - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid po
空气管路过滤器、调节器和/或润滑器——NFPA/T2的压力等级补充 6.1 R2-2000 流体动力部件-金属流体容器承压外壳疲劳验证和确定爆破压力额定值的方法

2000-03-15

Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007)
气瓶.带集成压力调节器的气瓶阀.规范和型式试验（ISO 22435-2007）

2009-04-08