首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D7640-16(2021)
到馆提醒
收藏跟踪
购买正版
Standard Specification for Engine Coolant Grade Glycerin 发动机冷却液级甘油的标准规范
发布日期: 2021-09-01
1.1 本规范涵盖发动机冷却液级甘油(1、2、3丙三醇、甘油)。 1.2 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers engine coolant grade glycerine (1, 2, 3 Propanetriol, Glycerol). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: D15.07
相似标准/计划/法规
现行
ASTM D7715-12(2021)
Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
重型发动机用全配方甘油基发动机冷却液的标准规范
2021-09-01
现行
ASTM E1177-23
Standard Specification for Engine Coolant Grade Glycol
发动机冷却液级乙二醇标准规范
2023-05-15
现行
ASTM D7714-11(2021)
Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
汽车和轻型设备用甘油基发动机冷却剂的标准规范
2021-09-01
现行
ASTM D7388-23
Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
发动机冷却剂级1,3-丙二醇(PDO)的标准规范
2023-03-01
现行
ASTM D7713-18(2023)
Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
含水发动机冷却液级乙二醇(标称体积的53%)的标准规范
2023-11-01
现行
ASTM D5752-10(2017)
Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
补充冷却剂添加剂(SCA)的标准规范 用于重型发动机的预冷却剂
2017-04-01
现行
ASTM D4985-10(2023)
Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
需要预充补充冷却剂添加剂(SCA)的重型发动机用低硅酸盐乙二醇基发动机冷却剂的标准规范
2023-09-01
现行
ASTM D8085-24
Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
汽车和轻型车辆用非水性发动机冷却液标准规范
2024-09-01
现行
ASTM D3306-21
Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
汽车和轻型设备用乙二醇基发动机冷却剂的标准规范
2021-11-01
现行
ASTM D6210-17
Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
用于重型发动机的全配方乙二醇发动机冷却液的标准规范
2017-11-01
现行
ASTM D7517-19
Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
重型发动机用全配方1,3丙二醇(PDO)基发动机冷却剂的标准规范
2019-04-01
现行
ASTM D6107-97(2023)
Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
轻型发动机冷却剂用止漏添加剂的标准规范
2023-11-01
现行
ASTM D7518-20
Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
用于汽车和轻型服务的1,3-丙二醇(PDO)基础发动机冷却液的标准规范
2020-04-01