1.1 这些方法用于估计耐化学性树脂砂浆的工作、初凝和使用强度固化时间。 1.2 以国际单位制表示的数值应视为标准。括号中给出的值是对英寸磅单位的数学转换，仅供参考，不被视为标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 4.1 这些方法为估算耐化学性树脂砂浆的工作时间、初凝时间和使用强度-凝结时间提供了一种手段。所获得的结果应作为指导，但不是为特定应用选择耐化学砂浆的唯一依据。

1.1 These methods are used to estimate the working, initial setting, and service strength setting times of chemical-resistant resin mortars. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 These methods offer a means of estimating the working time, initial setting time and service strength setting time of chemical-resistant resin mortars. The results obtained should serve as a guide in, but not as the sole basis for, selection of a chemical-resistant mortar for a particular application.