首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEEE C37.47-2000
到馆阅读
收藏跟踪
购买正版
American National Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches 美国高压限流型配电级熔断器和熔断器隔离开关国家标准
发布日期: 2000-02-09
本标准规定了高压(1000伏以上)配电级限流型熔断器及相关附件的规范。所有这些设备都适用于交流系统。这些规范适用于以下特定类型的设备: a) 配电级限流型熔断器和熔断器单元。 b) 配电级限流熔断器隔离开关。 c) 保险丝外壳组件(FEP)中使用的(a)至(b)项(见下文第1.1条所列类型) d) 专门用于配电级限流型保险丝和保险丝隔离开关的保险丝支架、保险丝单元、充电单元和保险丝座。 e) 专用于配电级限流型熔断器和熔断器隔离开关的可拆卸开关叶片。
This standard establishes specifications for high voltage (above 1000 volts) distribution class current limiting type fuses and associated accessories. All of these devices are intended for use on alternating current systems. These specifications apply to the following specific types of equipment: a) Distribution class current limiting type fuses and fuse units. b) Distribution class current-limiting fuse disconnecting switches. c) Items (a) thru (b) used in fuse enclosure packages (FEP) (see types listed in Clause 1.1 below) d) Fuse supports, fuse units, refill units and fuse mountings of the type used exclusively with distribution class current limiting type fuses, and fuse disconnecting switches. e) Removable switch blades of the type used exclusively with distribution class current limiting type fuses, and fuse disconnecting switches.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
IEEE/ANSI C37.53.1-1989
American National Standard High-Voltage Current-Limiting Motor-Starter Fuses -- Conference Test Procedures
美国国家标准高压限流电动机起动器熔断器会议试验规程
1989-01-01
现行
ANSI C37.85-2020
American National Standard for Switchgear -- Alternating-Current High-Voltage Power Vacuum Interrupters -- Safety Requirements for X-Radiation Limits
美国开关设备国家标准交流高压功率真空灭弧室X射线辐射限值的安全要求
2020-06-22
现行
IEEE/ANSI C37.85-1989
American National Standard for Switchgear-Alternating-Current High-Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits
美国开关设备交流高压功率真空灭弧室国家标准X辐射限值的安全要求
1989-02-22
现行
ANSI/NEMA C29.7-2015
American National Standard for Wet-Process Porcelain Insulators - High-Voltage Line-Post Type
美国湿法瓷绝缘子国家标准.高压线柱型
2015-10-02
现行
ANSI C29.7-1996(R2002;R2012)
American National Standard for Wet Process Porcelain Insulators - High-Voltage Line - Post Type
美国湿法瓷绝缘子国家标准.高压线路.柱型
1996-07-16
现行
IEEE/ANSI C37.12-1991
American National Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis— Specifications Guide
基于对称电流的交流高压断路器美国国家标准规范指南
1991-11-30
现行
IEEE/ANSI 342-1973
American National Standard Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
基于对称电流的交流高压断路器电容电流开关的美国国家标准应用指南
1973-05-16
现行
IEEE/ANSI C37.06-2000
American National Standard for AC High-Voltage Circuit Breakers - Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities
美国交流高压断路器国家标准——基于对称电流的额定值——首选额定值和相关要求的能力
2002-11-30
现行
IEEE C37.0781-1972
ANSI American National Standard Schedule of Dielectric Test Values for Outdoor AC High-Voltage Circuit Breaker External Insulation Rated on a Symmetrical Current Basis
ANSI美国国家标准《基于对称电流的户外交流高压断路器外部绝缘介质试验值一览表》
1971-11-30
现行
IEEE C37.47-2011
IEEE Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches
IEEE高压(>1000 V)配电级限流型熔断器和熔断器隔离开关标准规范
2012-02-03
现行
IEEE/ANSI C57.12.51-1981
American National Standard Requirements for Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
美国国家标准对501 kVA及以上三相通风干式电力变压器的要求 高压601至34 500伏 低压208Y/120至4160伏
1981-01-01
现行
IEEE/ANSI C57.12.52-1981
American National Standard Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
美国国家标准对501 kVA及以上三相密封干式电力变压器的要求 高压601至34 500伏 低压208Y/120至4160伏
1981-05-21
现行
IEEE PC57.12.24
American National Standard for Transformers-- Underground-Type Three-Phase Distribution Transformers 2500 kVA and Smaller; High Voltage: 34,500 GrdY/29 920 Volts and Below; Low Voltage: 480 Volts and Below--Requirements
美国变压器国家标准——2500 kVA及以下地下式三相配电变压器;高压:34500 GrdY/29920伏及以下;低压:480伏及以下——要求
2000-01-01
现行
IEEE C57.12.21-2000
American National Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers With High-Voltage Bushings: High Voltage (34 500 GrdY/19 920 V and Below) and Low Voltage (240/120 V, 167 kVA and Smaller)
美国国家标准对带高压套管的垫装、隔室式自冷单相配电变压器的要求:高压(34 500 GrdY/19 920 V及以下)和低压(240/120 V、167 kVA及以下)
1992-12-31
现行
IEEE/ANSI C57.12.25-1990
American National Standard for Transformers--Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors: High Voltage (34 500 GrdY/19 920 Volts and Below) and Low-Voltage (240/120 Volts; 167 kVA and Smaller)
美国变压器国家标准带可分离绝缘高压连接器的垫装、隔室式自冷单相配电变压器:高压(34 500 GrdY/19 920 V及以下)和低压(240/120 V;167 kVA及以下)
2002-11-30
现行
IEEE C37.43-2008
IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors
IEEE并联电容器保护用额定电压为1 kV至38 kV的高压排流、限流、组合式配电和功率级外部熔断器的标准规范
2008-07-25