BS EN ISO 52010-1:2017规定了能源气候数据转换的计算程序 计算。本文的主要内容是计算任意形状表面上的太阳辐照度 方向和倾斜。还提供了一种将太阳辐照度转换为照度的简单方法。任意表面上的太阳辐照度和照度可作为能量和能量的输入 建筑构件（如屋顶、立面和窗户）和构件的采光计算 技术建筑系统（如太阳能集热器、光伏板）。评估建筑物热湿性能所需的其他气候数据参数， 建筑构件或技术建筑系统[如风、温度、湿度和长- 波动 （热）辐射]应根据ISO 15927-4中的程序获得。这些数据是 在本文档中作为输入列出，并作为输出传递，无需任何转换。注1:通过本文件传递这些数据的原因是所有数据都有一个单一且一致的来源 EPB标准，并在特定应用需要时进行任何转换或其他处理。注2:引言中的表1显示了本文件在EPB集合中的相对位置 ISO 52000-1中规定的模块化结构背景下的标准。交叉引用:CEN/TS 16629:2014ISO 52000-1:2017ISO 7345:1987ISO 15927-4:2005 Ed 1ISO/TR 52016-2:2017ISO 9488:1999ISO 15927-2:2009 Ed 1ISO/TR 52010-2:2017ISO 15927-5:2004 Ed 1ISO/TR 52000- 2:2017ISO 15927-6:2007 Ed 1ISO 15927-4:2005 Ed 1ISO 15927-1:2003（R09）Ed 1CEN/TS 16628:2014购买本文件时可用的所有当前修订版均包含在购买本文件中。

BS EN ISO 52010-1:2017 specifies a calculation procedure for the conversion of climatic data for energy calculations.The main element in this document is the calculation of solar irradiance on a surface with arbitrary orientation and tilt. A simple method for conversion of solar irradiance to illuminance is also provided.The solar irradiance and illuminance on an arbitrary surface are applicable as input for energy and daylighting calculations, for building elements (such as roofs, facades and windows) and for components of technical building systems (such as thermal solar collectors, PV panels).Other parameters of climatic data needed to assess the thermal and moisture performance of buildings, building elements or technical building systems [like wind, temperature, moisture and long-wave (thermal) radiation] are to be obtained according to the procedures in ISO 15927-4. These data are listed in this document as input and passed on as output without any conversion.NOTE 1 The reason for passing these data via this document is to have one single and consistent source for all EPB standards and to enable any conversion or other treatment if needed for specific application.NOTE 2 Table 1 in the Introduction shows the relative position of this document within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.Cross References:CEN/TS 16629:2014ISO 52000-1:2017ISO 7345:1987ISO 15927-4:2005 Ed 1ISO/TR 52016-2:2017ISO 9488:1999ISO 15927-2:2009 Ed 1ISO/TR 52010-2:2017ISO 15927-5:2004 Ed 1ISO/TR 52000-2:2017ISO 15927-6:2007 Ed 1ISO 15927-4:2005 Ed 1ISO 15927-1:2003 (R09) Ed 1CEN/TS 16628:2014All current amendments available at time of purchase are included with the purchase of this document.