首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 2555:2018
到馆阅读
收藏跟踪
购买正版
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 - 液态树脂或乳液或分散体 - 使用单缸式旋转粘度计法测定表观粘度
发布日期: 2018-05-16
本文件规定了使用单筒旋转粘度计测定液态树脂表观粘度的方法。 该方法可用于0.02 Pa?s至6000Pa?s范围内的粘度测量。 本文件适用于牛顿和非牛顿液体,测量的表观粘度取决于测量过程中液体所处的速度梯度。
This document specifies a method of determining apparent viscosity of resins in a liquid state using a single cylinder type rotational viscometer. The method can be used for viscosity measurements in the range from 0,02 Pa?s to 60 000 Pa?s. This document is applicable to both Newtonian and non-Newtonian liquids and the measured apparent viscosity depends on the velocity gradient to which the liquids are subjected during the measurement.
分类信息
关联关系
研制信息
归口单位: ISO/TC 61/SC 5
相似标准/计划/法规
现行
GOST 25271-1993
Пластмассы. Смолы жидкие, эмульсии или дисперсии. Определение кажущейся вязкости по Брукфильду
塑料 处于液态的树脂或乳液或分散体 通过布鲁克菲尔德方法测定表观粘度
1993-10-21
现行
KS M ISO 2555(2017 Confirm)
플라스틱 - 애상, 현탁상 또는 분산상의 수지 - 브룩필드법에 의한 겉보기 점도의 측정
塑料-液态树脂或乳液或分散体-用布鲁克菲尔德试验法测定表观粘度
2002-10-18
现行
KS M ISO 2555(2022 Confirm)
플라스틱 - 애상, 현탁상 또는 분산상의 수지 - 브룩필드법에 의한 겉보기 점도의 측정
塑料-液态或乳液或分散体的树脂-用布氏试验法测定表观粘度
2002-10-18
现行
KS M ISO 3219(2018 Confirm)
플라스틱 - 액상, 에멜션, 또는 분산형태의 고분자/수지 - 회전점도계를 이용한 특정 전단속도에서의 점도측정
塑料-液态或乳液或分散体中的聚合物/树脂-用规定剪切速率的旋转粘度计测定粘度
2003-12-03
现行
KS M ISO 3219(2023 Confirm)
플라스틱 - 액상, 에멜션, 또는 분산형태의 고분자/수지 - 회전점도계를 이용한 특정 전단속도에서의 점도측정
塑料.液态或乳液或分散体的聚合物/树脂.用规定剪切速率的旋转粘度计测定粘度
2003-12-03
现行
UNE-EN ISO 2555-2000
PLASTICS - RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS - DETERMINATION OF APPARENT VISCOSITY BY THE BROOKFIELD TEST METHOD (ISO 2555:1989)
塑料液态树脂、乳液或分散体用布鲁克菲尔德试验法测定表观粘度
2000-07-24
现行
GB/T 21059-2007
塑料 液态或乳液态或分散体系聚合物/树脂 用旋转黏度计在规定剪切速率下黏度的测定
Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate
2007-08-13
现行
BS EN ISO 2555-2018
Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity using a single cylinder type rotational viscometer method
塑料 液态树脂或乳液或分散体 用单缸旋转粘度计法测定表观粘度
2018-06-19
现行
KS M ISO 2555
플라스틱 — 액상, 현탁상 또는 분산상의 수지 — 단일 원통형 회전 점도계를 이용한 겉보기 점도 측정
塑料.液态或乳液或分散体树脂.用单缸旋转粘度计法测定表观粘度
2023-12-17
现行
GB/T 40280-2021
塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method
2021-08-20
现行
UNE-EN ISO 3219-1995
PLASTICS. POLYMERS/RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS. DETERMINATION OF VISCOSITY USING A ROTATIONAL VISCOSIMETER WITH DEFINED SHEAR RATE. (ISO 3219:1993).
塑料 液态聚合物/树脂或乳液或分散体 使用具有规定剪切速率的旋转粘度计测定粘度 (ISO 3219:1993)
1995-12-26
现行
UNE-EN ISO 9371-1996
PLASTICS. PHENOLIC RESINS IN THE LIQUID STATE OR IN SOLUTION. DETERMINATION OF VISCOSITY. (ISO 9371:1990).
塑料 液态或溶液中的酚醛树脂 粘度的测定 (ISO 9371:1990)
1996-06-19