BS EN 13001-3-1:2012+A2:2018将与EN 13001-1和EN 13001-2一起使用，因此 规定防止起重机机械危险的一般条件、要求和方法 设计和理论验证。交叉引用:EN 13001-2EN 10025-6:2004ISO 17659:2002EN 10025-2:2004EN 10149-2:2013ISO 5817:2014ISO 273:1979（R09）EN 10149-3:2013EN ISO 898-1:2013EN ISO 148-1（ISO 148-1:2016）ASEN 10164:2004EN ISO 12100:2010EN 10029:2010EN ISO 5817:2014EN 10163-1:2004ISO 898-1:2013EN 10163-3:2004ISO 12100:2015-3:2013EN ISO 148-2004EN 12100:2001EN 1002:201906:2006EN10163-2:2004EN ISO 9013:2002EN 1993-1-8:2005EN 10025-4:2004EN ISO 17659:2004EN 13001-1EN 20273:1991EN 1993-1-5:2006ISO 2553:1992EN ISO 4042:1999ISO 15330: 1999ISO 4042:1999ISO 262:1998EN 1993-1-6:2007EN ISO 15330:1999ISO 9587:2007EN 1993-1-1:2005EN 22553:1994IN 18800-2:2008EN 1993-1-9EN 1999-1-3包含以下内容:修订，2018年8月；勘误表，2014年11月

BS EN 13001-3-1:2012+A2:2018 is to be used together with EN 13001-1 and EN 13001-2 and as such they specify general conditions, requirements and methods to prevent mechanical hazards of cranes by design and theoretical verification.Cross References:EN 13001-2EN 10025-6:2004ISO 17659:2002EN 10025-2:2004EN 10149-2:2013ISO 5817:2014ISO 273:1979 (R09)EN 10149-3:2013EN ISO 898-1:2013EN ISO 148-1 (ISO 148-1:2016) ASEN 10164:2004EN ISO 12100:2010EN 10029:2010EN ISO 5817:2014EN 10163-1:2004ISO 898-1:2013EN 10163-3:2004ISO 12100:2010EN 10025-3:2004ISO 148-1:2016EN 10088-2:2014ISO 9013:2002ISO 4306-1:2007EN 10160:1999EN 10163-2:2004EN ISO 9013:2002EN 1993-1-8:2005EN 10025-4:2004EN ISO 17659:2004EN 13001-1EN 20273:1991EN 1993-1-5:2006ISO 2553:1992EN ISO 4042:1999ISO 15330:1999ISO 4042:1999ISO 262:1998EN 1993-1-6:2007EN ISO 15330:1999ISO 9587:2007EN 1993-1-1:2005EN 22553:1994DIN 18800-2:2008EN 1993-1-9EN 1999-1-3Incorporates the following:Amendment, August 2018; Corrigendum, November 2014