ISO 9254:1993-航空和航天；螺栓标准花键头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸 -国家数字标准馆

现行 ISO 9254:1993

到馆阅读

收藏跟踪

购买正版

Aerospace — Bolt, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions 航空和航天；螺栓标准花键头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

发布日期： 1993-12-23

指定配置、尺寸和公差。用于制定航空航天产品标准。

Specifies configuration, dimensions and tolerances. Is intended for the drawing up of aerospace product standards.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 49.030.20航空航天制造用紧固件 - 螺栓、螺钉、螺柱

关联关系

研制信息

归口单位： ISO/TC 20/SC 4

相似标准/计划/法规

KS W ISO 9254(2020 Confirm)

항공 우주－강도 등급 1 100 MPa 이하, 금속재, 코팅한 또는 코팅하지 않은, 일반 또는 유효 지름 섕크, 긴 길이 MJ 나사, 일반 스플라인 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的金属材料有涂层或无涂层长MJ螺纹标准花键头标准或中径柄螺栓－尺寸

Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺栓标准花键头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

Aerospace — Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；螺栓标准双六角头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
螺栓标准双六角头标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

BS ISO 9255-2008

Aerospace. Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
航空航天螺栓标准花键头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

KS W ISO 9255(2020 Confirm)

항공 우주－강도 등급 1 100 MPa 이하, 금속재, 일반 섕크, 짧은 길이 또는 중간 길이 MJ 나사, 일반 스플라인 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层的金属材料短或中长MJ螺纹标准花键头标准柄螺栓－尺寸

BS 05/30128695 DC

ISO 9255. Aerospace. Bolts, normal spline head, normal shank, short or medium-length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions
ISO 9255 航空航天螺栓标准花键头标准柄短或中等长度MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

KS W ISO 9256(2020 Confirm)

항공 우주－강도 등급 1 100 MPa 이하, 금속재, 일반 또는 유효 지름 섕크, 긴 길이 MJ 나사, 큰 6각 머리 볼트－치수
航空航天－强度等级小于或等于1100兆帕的有涂层或无涂层金属材料长MJ螺纹标准或中径柄大六角头螺栓－尺寸

Aerospace — Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
航空和航天；大六角头螺栓标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa——尺寸

Aerospace — Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 275 MPa — Dimensions
航空和航天；有涂层或无涂层的金属材料长MJ螺纹、标准或中径杆、缩径双六角头螺栓强度等级小于或等于1 275 MPa——尺寸

KS W 0931(2018 Confirm)

항공 우주 - 정육각머리, 정상 몸통, 단형 또는 중간형 길이 MJ 나사, 금속재, 도금 또는 비도금 볼트, 강도 분류 1100MPa 이하 -치수
航空航天 - 螺栓标准六角头标准柄短或中等长度MJ螺纹金属材料涂层或无涂层强度等级小于或等于1100MPa - 尺寸

KS W 0931(2023 Confirm)

항공 우주 - 정육각머리, 정상 몸통, 단형 또는 중간형 길이 MJ 나사, 금속재, 도금 또는 비도금 볼트, 강도 분류 1100MPa 이하 -치수
航空航天.强度等级小于或等于1100MPa的涂覆或未涂覆金属材料短或中等长度MJ螺纹普通六角头螺栓.尺寸

UNE-EN 2889-1996

AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 ºC.
航空航天系列镀镉合金钢制短螺纹粗公差标准杆标准六角头螺栓分类:900 MPA（环境温度）/235ºC

BS EN 4132-2009

Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C
航空航天系列镀镉合金钢制长螺纹粗公差标准杆标准六角头螺栓分类:1100兆帕（环境温度）/235摄氏度

BS EN 2859-2006

Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C
航空航天系列镀镉合金钢制短螺纹紧公差标准杆标准六角头螺栓分类:1100兆帕（环境温度）/235摄氏度

UNE-EN 2888-1996

AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 ºC.
航空航天系列钝化耐腐蚀钢制短螺纹粗公差标准杆标准六角头螺栓分类:600兆帕（环境温度）/425ºC

Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa. Dimensions
大六角头螺栓标准或中径杆长MJ螺纹金属材料有涂层或无涂层强度等级小于或等于1100 MPa 尺寸

Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa. Dimensions
有涂层或无涂层、金属材料制、标准或中径杆、长MJ螺纹、缩径双六角头螺栓强度等级小于或等于1275 MPa 尺寸

BS EN 2888-2006

Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) / 425°C
航空航天系列钝化耐腐蚀钢制短螺纹粗公差标准杆标准六角头公制螺栓分类:600兆帕（环境温度）/425摄氏度

BS EN 3052-2009

Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 °C
航空航天系列钝化耐热耐腐蚀钢制短螺纹紧公差标准杆标准六角头螺栓分类:1100兆帕（环境温度）/425摄氏度

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统