API MPMS Chapter 4.9 Part 3(R2015)-用标准流量计校准法测定位移校准仪的体积第一版-国家数字标准馆

现行 API MPMS Chapter 4.9 Part 3(R2015)

到馆提醒

收藏跟踪

购买正版

Determination of the Volume of Displacement Provers by the Master Meter Method of Calibration, First Edition 用标准流量计校准法测定位移校准仪的体积第一版

发布日期： 2010-04-01

本标准涵盖了确定现场数据所需的程序，这些数据是通过主仪表校准方法计算现场位移校准仪的基准校准仪体积（BPV）所必需的。本标准适用于在计量条件下被视为清洁、单相、均质和牛顿流体的液体。本标准不包括详细的计算程序，见API MPMS第12.2.5章。

This standard covers the procedures required to determine the field data necessary to calculate a Base Prover Volume (BPV) of a field displacement prover by the master meter method of calibration.This standard applies to liquids that for all practical purposes are considered to be clean, single-phase, homogeneous, and Newtonian at metering conditions.Detailed calculation procedures are not included in this standard, see API MPMS Chapter 12.2.5.

分类信息

发布单位或类别：美国-美国石油学会

关联关系

研制信息

相似标准/计划/法规

现行

API MPMS Chapter 4.9.Part 4-2010(R2021)

Determination of the Volume of Displacement and Tank Provers by the Gravimetric Method of Calibration, First Edition
用重量校准法测定排水量和储罐校准器的体积第一版

2010-10-01

现行

API MPMS Chapter 4.9.1-2022

Manual of Petroleum Measurement Standards Chapter 4.9.1, Introduction to the Determination of the Volume of Displacement and Tank Provers, Second Edition
《石油计量标准手册》第4.9.1章排量和储罐校准器体积测定简介第二版

2022-04-01

现行

API MPMS Chapter 4.9 Part 2-2005(R2015)

Manual of Petroleum Measurement Standards, Chapter 4-Proving Systems, Section 9-Methods of Calibration for Displacement and Volumetric Tank Provers, Part 2-Determination of the Volume of Displacement and Tank Provers by the Waterdraw Method of Calibration, First Edition
《石油计量标准手册》第4章——验证系统第9节——排水量和容积式储罐校准仪的校准方法第2部分——通过排水校准法测定排水量和储罐校准仪的容积第一版

2005-12-01