SAE AMS4128E-轧制或冷加工1.0Mg-0.60Si-0.30Cu-0.20Cr（6061-T451）固溶热处理和拉伸消除应力的铝合金棒材-国家数字标准馆

现行 SAE AMS4128E

到馆提醒

收藏跟踪

购买正版

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching 轧制或冷加工1.0Mg-0.60Si-0.30Cu-0.20Cr（6061-T451）固溶热处理和拉伸消除应力的铝合金棒材

发布日期： 2021-06-28

本规范涵盖标称直径为0.500英寸（12.7 mm）至8.000英寸（203.2 mm）的铝合金，或平行边之间的最小差值，横截面积为50平方英寸（322.6平方厘米）（见8.7）。

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see8.7).

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Aluminum Alloy, Bars, Rolled Or Cold Finished 1.0mg 0.60si 0.28cu 0.20cr Stress Relief Stretched
铝合金、棒材、轧制或冷加工1.0mg 0.60si 0.28cu 0.20cr应力消除拉伸

Aluminum Alloy, Bars, Rods, and Wire 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4) Cold Finished, Solution Heat Treated and Naturally Aged
铝合金、棒材、棒材和线材1.0Mg-0.60Si-0.30Cu-0.20Cr（6061-T4）冷加工、固溶热处理和自然时效

Aluminum Alloy, Rolled or Cold Finished, Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651)
轧制或冷加工铝合金棒材、棒材、线材和闪光焊环1.0Mg-0.60Si-0.28Cu-0.20Cr（6061；-T6 -T651）

Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings and Stock for Flash Welded Rings Annealed 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O)
轧制或冷加工铝合金棒材、棒材、线材和闪光焊环以及退火1.0Mg-0.60Si-0.28Cu-0.20Cr（6061-O）的闪光焊环用坯料

ASTM B211/B211M-23

Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
轧制或冷加工的铝及铝合金棒材、棒材和线材的标准规范

Aluminum Alloy, Rolled or Cold Finished Bars and Rods, 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86) Solution Heat Treated, Cold Worked, and Artificially Aged
经固溶热处理、冷加工和人工时效的12.2Si-1.0Mg-0.90Cu-0.90Ni（4032-T86）轧制或冷加工铝合金棒材

Aluminum Alloy, Bars, Rods, and Wire, Rolled Or Cold-Finished 99.0a1, as Fabricated
铝合金、棒材、棒材和线材轧制或冷加工99.0a1 制造时

SAE AMSQQA225/7A

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 5052
铝合金、棒材、棒材和线材轧制、拉伸或冷加工 5052

SAE AMSQQA225/3A

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 2011
铝合金、棒材、棒材和线材轧制、拉伸或冷加工 2011年

SAE AMSQQA225/2A

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 3003
铝合金、棒材、棒材和线材轧制、拉伸或冷加工 3003

SAE AMSQQA225/10A

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 6262
轧制、拉伸或冷加工铝合金棒材、棒材和线材 6262

Tolerances, Aluminum And Aluminum Alloy Bar, Rod, Wire, And Forging Stock Rolled Or Cold-Finished
轧制或冷加工的铝及铝合金棒材、棒材、线材和锻件的公差

Aluminum Alloy, Rolled or Cold Finished, Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress Relieved, Artificially Aged
铝合金轧制或冷加工棒材和棒材12.2Si-1.0Mg-0.90Cu-0.90Ni（4032-T651）固溶热处理消除应力人工时效

Tolerances, Metric, Aluminum and Aluminum Alloy Bar, Rod, Wire, and Forging Stock, Rolled, Drawn, Or Cold Finished
轧制、拉伸或冷加工的公制铝及铝合金棒材、棒材、线材和锻材公差

SAE AMSQQA225/8B

Aluminum Alloy 6061, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished
6061铝合金、棒材、线材和特殊形状；轧制、拉伸或冷加工

Aluminum Alloy Bars and Rods, Rolled or Cold-Finished, 2.5Mg - 0.25Cr (5052-F), As Fabricated
铝合金棒材轧制或冷加工 2.5Mg-0.25Cr（5052-F）制造时

Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished
铝合金、棒材、棒材和线材4.4cu 1.5mg 0.60mn轧制、拉伸或冷加工

SAE AMSQQA225/6B

Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished (Stabilized: Mar 2018)
2024铝合金棒材、棒材和线材；轧制、拉伸或冷加工（稳定:2018年3月）

SAE AMSQQA225/5A

Aluminum Alloy, 2017, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished (Stabilized: Nov 2018)
铝合金 2017年棒材、棒材和线材轧制、拉伸或冷加工（稳定化:2018年11月）

Aluminum Alloy, Rolled or Cold Finished Bars and Rods, (7075-T651), Solution and Precipitation Heat Treated
固溶和沉淀热处理的轧制或冷加工棒材和棒材铝合金（7075-T651）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统