1.1 本试验方法涵盖了一个确定润滑脂摩擦系数的程序，以及在受到高频线性振荡时，润滑脂在滚动型运动下防止磨损的能力。 1.2 以国际单位制表示的数值应视为标准。本标准不包括其他计量单位。 1.3 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 5.1 该试验方法可用于确定润滑脂在选定温度和指定载荷下滚动运动类型下的抗磨性能和摩擦系数，该温度和载荷用于滑动滚动接触，其中在初始高赫兹线接触压力下，高速振动或启停运动存在长时间。它已被用作齿轮、滚动轴承或凸轮/从动件系统中使用的润滑剂的筛选测试。该测试方法的用户应确定结果是否与现场性能或其他应用程序相关。

1.1 This test method covers a procedure for determining the coefficient of friction of greases and their ability to protect against wear under a rolling type of motion when subjected to high-frequency, linear oscillation. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This test method can be used to determine anti-wear properties and coefficients of friction of greases under rolling type of movement at selected temperatures and loads specified for use in slip-rolling contacts in which high-speed vibrational or start-stop motions are present for extended periods of time under initial high Hertzian line contact pressures. It has found application as a screening test for lubricants used in gears, rolling bearings or cam/follower systems. Users of this test method should determine whether results correlate with field performance or other applications.