BS EN ISO 15996:2017规定了气瓶阀门的设计、型式试验和标记要求 包括残余压力装置，以下简称残余压力阀（RPV）。本文件适用于以下类型的RPV:a）拟安装在可再充装运输气瓶上的气瓶阀；b） 气缸组的主阀（不包括球阀）；c） 带集成压力调节器（VIPR）的气缸阀或主阀；d） 压力桶和压力管的阀门；输送压缩或液化气体的容器。注:如果没有模棱两可的风险，则应使用气瓶、压力桶、管道和气瓶束 在本文件中使用了“圆柱体”这一术语。这些要求是对ISO 10297中要求的补充。对于RPD单机设备，也可以使用本文档。 本文件不适用于便携式灭火器、低温设备、低压设备的RPV 压力制冷剂气体（气瓶试验压力小于50巴）、溶解气体或液化气体 石油气（LPG）。交叉引用:ISO 10524-3:2005（R09）Ed 1ISO 10297:2014ISO 10286:2015ISO 22435:2007 Ed 1ISO 11114-1:2012ISO 8573-1:2010ISO 11114-2:2013 ED2CGA V-1:2013 ED13MIL-STD-810GCGA V-9EIGA SI 21/13购买本文件时提供的所有当前修改件均包括在内。

BS EN ISO 15996:2017 specifies design, type testing and marking requirements for cylinder valves incorporating residual pressure devices, hereinafter referred to as residual pressure valves (RPVs).This document applies to the following types of RPVs:a) cylinder valves intended to be fitted to refillable transportable gas cylinders;b) main valves (excluding ball valves) for cylinder bundles;c) cylinder valves or main valves with integrated pressure regulator (VIPR);d) valves for pressure drums and tubes;which convey compressed or liquefied gases.NOTE Where there is no risk of ambiguity, cylinders, pressure drums, tubes and cylinder bundles are addressed with the collective term "cylinder" within this document.These requirements are in addition to those in ISO 10297.For RPD stand-alone devices this document can also be applied.This document does not apply to RPVs for portable fire extinguishers, cryogenic equipment, low pressure refrigerant gases (cylinder test pressure less than 50 bar), dissolved gases or liquefied petroleum gas (LPG).Cross References:ISO 10524-3:2005(R09) Ed 1ISO 10297:2014ISO 10286:2015ISO 22435:2007 Ed 1ISO 11114-1:2012ISO 8573-1:2010ISO 11114-2:2013 ED2CGA V-1:2013 ED13MIL-STD-810GCGA V-9EIGA SI 21/13All current amendments available at time of purchase are included with the purchase of this document.