BS EN 14305:2015规定了工厂制多孔玻璃产品的要求 用于建筑设备和工业装置的隔热，具有操作性 温度范围约为-265°C至+430°C。在-50°C的工作温度以下，对产品在环境中的适用性进行特殊测试 建议使用预期用途（例如氧气液化）。应注意制造商的建议 在所有情况下。这些产品以贴面或未贴面的板材、管段、管段和管道的形式制造 预制件。本欧洲标准描述了产品特性，包括测试程序， 合格性、标记和评价。本标准涵盖的产品也用于预制隔热系统和 复合板； 不包括包含这些产品的系统的性能。本欧洲标准未规定应达到的给定财产的要求水平 通过一种产品来证明其在特定应用中的适用性。测试所需的水平 给定的应用可以在法规和招标书中找到。在10°C下，宣称导热系数大于0065 W/（m·K）的产品不包括在 这个标准。本欧洲标准不包括用于建筑结构隔热的产品。交叉引用:EN 822EN 823EN 824EN 825EN 826:2013EN 1604EN 1606EN 1607EN 12085EN 12086:2013EN 12087EN 12089EN 12430EN 12667EN 12939EN 13172:2012EN 13467EN 13468EN 13472EN 13501-1:2007+A1:2009EN 13820EN 13823EN 14706EN 14707EN 15715:2009EN ISO 354ISO 354:2003EN ISO 1182ISO 1182: 2010EN ISO 1716ISO 1716EN ISO 8497ISO 8497EN ISO 9229:2007ISO 9229EN ISO 11654ISO 11654EN ISO 11925-2ISO 13787ISO 13787ISO 7884-7305/2011/EUEN 1602EN 1603EN 12090EN 13167EN 13238EN 13470EN 13471EN ISO 10456ISO 10456ISO 65购买本文件时提供的所有当前修订版均包括在内。

BS EN 14305:2015 specifies the requirements for factory made cellular glass products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 265 °C to + 430 °C.Below an operating temperature of - 50 °C, special tests regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturer's advice should be heeded in all cases.The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware.This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.Products with a declared thermal conductivity greater than 0,065 W/(m·K) at 10 °C are not covered by this standard.This European Standard does not cover products for the insulation of the building structure.Cross References:EN 822EN 823EN 824EN 825EN 826:2013EN 1604EN 1606EN 1607EN 1608EN 1609EN 12085EN 12086:2013EN 12087EN 12089EN 12430EN 12667EN 12939EN 13172:2012EN 13467EN 13468EN 13472EN 13501-1:2007+A1:2009EN 13820EN 13823EN 14706EN 14707EN 15715:2009EN ISO 354ISO 354:2003EN ISO 1182ISO 1182:2010EN ISO 1716ISO 1716EN ISO 8497ISO 8497EN ISO 9229:2007ISO 9229EN ISO 11654ISO 11654EN ISO 11925-2ISO 11925-2EN ISO 13787ISO 13787ISO 7884-7305/2011/EUEN 1602EN 1603EN 12090EN 13167EN 13238EN 13470EN 13471EN ISO 10456ISO 10456ISO 65All current amendments available at time of purchase are included with the purchase of this document.