首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 10094-2:2021
到馆提醒
收藏跟踪
购买正版
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature 气压传动.电动气压控制阀.第2部分:确定供应商文献中主要特性的试验方法
发布日期: 2021-11-22
本文件规定了试验程序和呈现参数相关结果的方法,这些参数定义了供应商的电动气动连续压力控制阀文献中包含的主要特性,符合ISO?10094-1。 本文件的目的是: -?通过标准化试验方法和试验结果的呈现,促进比较,以及 -?协助在压缩空气系统中正确使用这些部件。 规定的试验旨在对不同类型的连续压力控制阀进行比较;这些不是对每个制造产品进行的生产测试。 本文件中描述的试验适用于排气口与大气通风的部件。 注?1?ISO?6953规定了与非电动调节气动连续压力控制阀相关的试验- 2. 注2:ISO 10041-2规定了与电动气动连续流量控制阀相关的试验。 注?3?ISO?6953-3提供了一种使用等温罐而不是流量计的流量特性替代动态测试方法。然而,该方法仅测量正向流和泄压流特性滞后曲线的下降流速部分。
This document specifies the test procedures and a method of presenting results concerning the parameters which define the main characteristics to be included in the supplier's literature of the electro-pneumatic continuous pressure control valves, conforming to ISO 10094-1. The purpose of this document is: —    to facilitate comparison by standardizing the test methods and the presentation of the test results, and —    to assist in the proper application of these components in compressed air systems. The specified tests are intended to allow comparison between the different types of continuous pressure control valves; these are not production tests to be carried out on each manufactured product. The tests described in this document are for components with an exhaust port vented to the atmosphere. NOTE 1   The tests related to non-electrically modulated pneumatic continuous pressure control valves are specified in ISO 6953-2. NOTE 2   The tests related to electro-pneumatic continuous flow control valves are specified in ISO 10041-2. NOTE 3   ISO 6953-3 provides an alternate dynamic test method for flow-rate characteristics using an isothermal tank instead of a flow meter. However, this method measures only the decreasing flow rate part of the hysteresis curve of the forward flow and relief flow characteristics.
分类信息
关联关系
研制信息
归口单位: ISO/TC 131/SC 5
相似标准/计划/法规
现行
BS ISO 10094-1-2021
Pneumatic fluid power. Electro-pneumatic pressure control valves-Main characteristics to include in the supplier's literature
气动流体动力 电动气动压力控制阀
2021-11-29
现行
GB/T 39956.1-2021
气动 电-气压力控制阀 第1部分:商务文件中应包含的主要特性
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 1:Main characteristics to include in the supplier's literature
2021-03-09
现行
ISO 10094-1-2021
Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 1: Main characteristics to include in the supplier's literature
气动流体动力.电动气动压力控制阀.第1部分:供应商文献中包含的主要特性
2021-11-22
现行
BS ISO 10094-2-2021
Pneumatic fluid power. Electro-pneumatic pressure control valves-Test methods to determine main characteristics to include in the supplier's literature
气动流体动力 电动气动压力控制阀
2021-11-29
现行
BS ISO 10041-1-2010
Pneumatic fluid power. Electro-pneumatic continuous flow control valves-Main characteristics to include in the supplier's literature
气动流体动力 电动气动连续流量控制阀
2010-11-30
现行
GB/T 39956.2-2021
气动 电-气压力控制阀 第2部分:评定商务文件中应包含的主要特性的试验方法
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 2: Test methods to determine main characteristics to include in the supplier's literature
2021-03-09
现行
ISO 10041-1-2010
Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 1: Main characteristics to include in the supplier's literature
气动流体动力——电动气动连续流量控制阀第1部分:供应商提供的主要特性'中国文学
2010-10-11
现行
BS ISO 10041-2-2010
Pneumatic fluid power. Electro-pneumatic continuous flow control valves-Test methods to determine main characteristics to include in the supplier's literature
气动流体动力 电动气动连续流量控制阀
2010-11-30
现行
JB/T 6378-2008
气动换向阀技术条件
Rules relating of pneumatic fluid power directional control valve
2008-06-16
现行
ISO 10041-2-2010
Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
气动流体动力——电动气动连续流量控制阀第2部分:确定供应商提供的主要特性的试验方法'中国文学
2010-10-11
现行
NFPA(Fluid) T3.21.8 R1-2008(R2018)
Pneumatic fluid power--Measurement of response time --Directional control valves
气动流体动力响应时间的测量定向控制阀
2008-09-02
现行
GB/T 22107-2008
气动方向控制阀 切换时间的测量
Pneumatic fluid power - Directional control valves - Measurement of shifting time
2008-06-25
现行
ISO 12238-2023
Pneumatic fluid power — Directional control valves — Measurement of shifting time
气压传动.方向控制阀.转换时间的测量
2023-02-16
现行
BS 09/30196753 DC
BS ISO 10041-1. Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Part 1. Main characteristics to include in the supplier's literature
BS ISO 10041-1 气动流体动力 电动气动连续流量控制阀 第一部分 供应商文献中包含的主要特征
2009-04-21
现行
BS ISO 11727-1999
Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components
气动流体动力 控制阀和其他部件的端口和控制机构标识
1999-07-15
现行
GB/T 32215-2015
气动 控制阀和其他元件的气口和控制机构的标识
Pneumatic fluid power—Identification of ports and control mechanisms of control valves and other components
2015-12-10
现行
ISO 11727-1999
Pneumatic fluid power — Identification of ports and control mechanisms of control valves and other components
气动流体动力——控制阀和其他部件端口和控制机构的标识
1999-05-06
现行
BS ISO 19973-2-2015+A1-2019
Pneumatic fluid power. Assessment of component reliability by testing-Directional control valves
气动流体动力 通过测试评估部件可靠性
2019-02-08
现行
NFPA(Fluid) T3.21.4 R2-2000(R2019)
Pneumatic valve - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pneumatic valve
气动阀——NFPA/T2的压力等级补充 6.1 R2-2000 流体动力部件-金属流体动力气动阀承压外壳疲劳验证和确定爆破压力额定值的方法
2000-03-15
现行
JIS B 8419-2010
Pneumatic fluid power -- Directional control valves -- Measurement of shifting time and response time
气动流体动力方向控制阀换档时间和响应时间的测量
2010-01-01