本标准适用于以贴面和未贴面棉絮、卷材和板材形式制造的矿物纤维隔热材料。如果使用饰面，则其应为渗透膜或阻汽膜，分别如表1中针对类型2和类型3所定义。本标准不允许在棉絮和卷筒上使用牛皮纸贴面。当在坡度不超过4.5:12的无限制空间中使用时，它也适用于松散填充矿物纤维隔热。本标准规定了在正常气候条件下使用的产品的性能要求和试验方法，这些产品用于轻型框架建筑和人造房屋中的阁楼、地板、天花板和墙壁（地上和地下）的隔热。本标准还要求制造商提供施工现场证书，以供涂敷器使用。 制造商和第三方验证质量一致性的推荐做法包括在附录B中的预制绝缘和附录C中的松散填充绝缘。

This Standard applies to mineral fibre thermal insulation manufactured in the form of faced and unfaced batts, rolls and boards. Where facings are used, they shall be either permeable or vapour retarding membranes, as defined in Table 1 for Types 2 and 3, respectively. This standard does not permit the application of kraft paper facings on batts and rolls. It also applies to loose fill mineral fibre thermal insulation when used in unconfined spaces with slopes not exceeding 4.5:12.This Standard specifies performance requirements and test methods for the products used under normal climatic conditions to thermally insulate attics, floors, ceilings and walls (above and below ground grade) in light frame construction buildings and manufactured housing.This Standard also includes requirements for the manufacturer to provide the Job Site Certificate for use by the applicators.Recommended practice for verification of quality consistency by the manufacturer and by a third party are included in Annex B for preformed insulation and Annex C for loose fill insulation.