CSA序言这是CSA C22的第一版。2第60730-2-13号，电气自动控制装置-第2-13部分:湿度传感控制装置的特殊要求，采用了相同名称的IEC（国际电工委员会）标准60730-2-13（第三版，2017-10），但存在加拿大偏差。它是CSA集团根据《加拿大电气规范》第二部分发布的一系列标准之一。为简洁起见，本标准通篇称为“CSA C22.2编号60730-2-13”。本标准拟与CSA E60730-1:15《自动电气控制》结合使用- 第1部分:一般要求（采用IEC 60730-1:2013，有加拿大偏差）；CSA E60730-1:15的修正案1:2017（采用了IEC修正案1:2015，带有加拿大的偏差）；以及CSA E60730-1:15的修正案2:2021（采用了IEC修正案2:2020，与加拿大的偏差）。本标准适用于本标准规定范围内的合格评定。本标准的制定符合加拿大标准委员会对加拿大国家标准的要求。CSA集团已将其作为加拿大国家标准发布。范围第1部分的本条款适用，以下情况除外: 1.1范围更换:IEC 60730的本部分适用于在设备中、设备上或与设备相关的自动电气湿度传感控制，包括加热、空调和类似应用的控制。该设备可以使用电、气、油、固体燃料、太阳能等，或其组合。注:在本标准中，“设备”一词包括“设备”和“控制系统”。本国际标准适用于构成ISO 16484范围内楼宇自动化控制系统一部分的自动电气湿度传感控制装置。本标准也适用于公众可能使用的设备的自动电气湿度传感控制，例如拟用于商店、办公室、医院、农场以及商业和工业应用的设备。 本标准不适用于专门用于工业过程应用的自动电气湿度传感控制装置，除非设备标准中明确提及。1.1.2更换:本标准适用于响应或控制湿度的机械或电动自动电气控制装置。1.1.3不适用。

CSA PrefaceThis is the first edition of CSA C22.2 No. 60730-2-13, Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60730-2-13 (third edition, 2017-10). It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code. For brevity, this Standard will be referred to as "CSA C22.2 No. 60730-2-13" throughout. This Standard is intended to be used in conjunction with CSA E60730-1:15, Automatic electrical controls - Part 1: General requirements (adopted IEC 60730-1:2013, with Canadian deviations); Amendment 1:2017 to CSA E60730-1:15 (adopted IEC Amendment 1:2015, with Canadian deviations); and Amendment 2:2021 to CSA E60730-1:15 (adopted IEC Amendment 2:2020, with Canadian deviations). This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.ScopeThis clause of Part 1 is applicable except as follows:1.1 Scope Replacement: This part of IEC 60730 applies to automatic electrical humidity sensing controls for use in, on or in association with equipment, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof.NOTE Throughout this standard, the word "equipment" includes "appliance" and "control system". This International Standard is applicable to automatic electrical humidity sensing controls forming part of a building automation control system within the scope of ISO 16484. This standard also applies to automatic electrical humidity sensing controls for equipment that may be used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications. This standard does not apply to automatic electrical humidity sensing controls intended exclusively for industrial process applications unless explicitly mentioned in the equipment standard.1.1.2 Replacement: This standard applies to automatic electrical controls, mechanically or electrically operated, responsive to or controlling humidity.1.1.3 Not applicable.