本文件定义了如何使用ISO/IEC 18000系列的RFID空中接口标准 基于反向散射技术的RFID标签定位，特别是 ISO/IEC 18000-4、ISO/IEC 18000-61、ISO/IEC 18000-62、ISO/IEC 18000-63和ISO/IEC 18000-64 顺从的 本文件规定了本地化的物理和逻辑要求。该系统包括 审问者，也称为读卡器，标签，也称为标签。审讯人员收到 通过向标签发送调制的射频信号，来自标签的信息，标签通过 调制天线的反射系数，从而对信息信号进行后向散射 给审问者。用于数据交换的调制射频信号基于 ISO/IEC 18000系列，此外，还有具有相同或 不同的载波频率用于定位。 本文件描述了测试所需的信号 定位，从询问者接收到的信号中获取定位信息的方法 以及标签和审讯人员的要求。交叉引用:ISO/IEC 18047-6ISO/IEC 18000-63ISO/IEC 19762ISO/IEC 24730-1ISO/IEC 18000-61ETSI EN 300-440ISO/IEC 18000-62ISO/IEC 18000-64ISO/IEC 18000-4ISO/IEC 18000-63ARIB STD-T66ETSI EN 300-328ETSI EN 302-208购买本文件时提供的所有当前修改件均包括在内。

This document defines how to use the RFID air interface standards of the ISO/IEC 18000 series that are based on backscatter technology for localization of RFID tags, specifically tags which are ISO/IEC 18000-4, ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63 and ISO/IEC 18000-64 compliant. This document specifies the physical and logical requirements for localization. The system comprises interrogators, also known as readers, and tags, also known as labels. An interrogator receives information from a tag by transmitting a modulated RF signal to the tag and the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the interrogator. The modulated RF signal for data exchange is based on the relevant part of the ISO/IEC 18000 series and, in addition, there is a superimposed modulated RF signal with the same or different carrier frequency intended for localization. This document describes the signals required for localization, the method to derive localization information from the signals received by the interrogator and the requirements onto tags and interrogators.Cross References:ISO/IEC 18047-6ISO/IEC 18000-63ISO/IEC 19762ISO/IEC 24730-1ISO/IEC 18000-61ETSI EN 300-440ISO/IEC 18000-62ISO/IEC 18000-64ISO/IEC 18000-4ISO/IEC 18000-63ARIB STD-T66ETSI EN 300-328ETSI EN 302-208All current amendments available at time of purchase are included with the purchase of this document.