BS ISO 7685:2019-玻璃纤维增强热固性塑料（GRP）管初始环刚度的确定-国家数字标准馆

现行 BS ISO 7685:2019

到馆提醒

收藏跟踪

购买正版

Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial ring stiffness 玻璃纤维增强热固性塑料（GRP）管初始环刚度的确定

发布日期： 2019-07-18

本文件规定了测定玻璃钢初始环刚度的方法
热固性塑料（GRP）管。给出了两种方法（恒载荷和恒挠度），以及
在规定的挠度限制范围内，每一个都同样有效，可以用于任何直径。交叉引用:ISO 3126购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies methods for determining the initial ring stiffness of glass-reinforced
thermosetting plastics (GRP) pipes. Two methods are given (constant load and constant deflection), and
within the specified deflection limits, each is equally valid and can be used for any diameter.Cross References:ISO 3126All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness
玻璃钢热固性塑料（GRP）管初始环刚度的测定

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管.初始比环刚度的测定；德文版EN 1228:1996

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管；初始纵向拉伸性能的测定；德文版EN 1393:1996

유리섬유강화 열경화성 플라스틱(GRP) 배관－주기적 내부 압력 변화에 대한 저항성능 측정
玻璃纤维增强热固性塑料（GRP）管耐循环内压的测定

KS M ISO 15306(2021 Confirm)

유리섬유강화 열경화성 플라스틱(GRP) 배관－주기적 내부 압력 변화에 대한 저항성능 측정
玻璃纤维增强热固性塑料（GRP）管耐循环内压的测定

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure
玻璃纤维增强热固性塑料（GRP）管——循环内压阻力的测定

BS EN 1393-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始纵向拉伸性能的测定

BS EN 1228-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

UNE-EN 1228-1996

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL SPECIFIC RING STIFFNESS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

JIS K 7032-2002

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始比环刚度的测定

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 원주 방향 초기 비강성의 측정
塑料管道系统 - 玻璃增强热固性塑料（grp）管道 - 初始特定环刚度的测定

UNE-EN 1393/AC-1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF INITIAL LONGITUDINAL TENSILE PROPERTIES.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始纵向拉伸性能的测定

JIS K 7033-1998

Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of initial tensile properties
塑料管道系统玻璃纤维增强热固性塑料（GRP）管初始拉伸性能的测定

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管.表观初始周向拉伸强度的测定；德文版EN 1394:1996

BS EN 1394-1997

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent initial circumferential tensile strength
塑料管道系统玻璃纤维增强热固性塑料（GRP）管表观初始周向抗拉强度的测定

BS EN 1447-2009+A1-2010

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
塑料管道系统玻璃纤维增强热固性塑料（GRP）管长期抗内压性的测定

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions
塑料管道系统玻璃纤维增强热固性塑料（GRP）管干燥条件下蠕变系数的测定

UNE-EN 1394-1997

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE APPARENT INITIAL CIRCUMFERENTIAL TENSILE STRENGTH.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管表观初始周向抗拉强度的测定

플라스틱 배관 시스템 — 유리 섬유 강화 열경화성 플라스틱(GRP) 관 — 건조 조건에서 크리프 계수의 측정
塑料管道系统 - 玻璃增强热固性塑料（Grp）管道 - 干燥条件下蠕变因子的测定

JIS K 7037-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the apparent initial circumferential tensile strength
塑料管道系统玻璃纤维增强热固性塑料（GRP）管表观初始周向拉伸强度的测定

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统