BS EN 16836-1:2016给出了通信系统标准化框架的规定 适用于从计量设备到网状网络内其他设备的数据交换。信息技术 包括有关应用程序流程功能、分层协议和计量体系结构的信息。本欧洲标准还规定了如何解释EN 16836第2部分和第3部分，其中列出了 对ZigBee文件的引用。本标准适用于以下通信系统: 在网格中的一个或多个仪表和其他设备之间包含消息和网络 网络，如家用显示器（IHD）和通信中心。这个标准允许路由 在设备之间，还允许通道灵活性，以避免与同一设备的其他网络发生竞争 或在同一频带上运行的其他类型的网络。本标准旨在支持气体和水等设备的低功耗通信 可通过网络随时在mesh网络上提供来自此类设备的数据的仪表 永久供电设备内的代理功能。本标准规定了一种通信协议，可包含多种智能计量 来自不同国家的建筑。本标准并非旨在限制，或实际上暗示一种选择或选择 优先于许多可能的体系结构中的任何一种，但更多的是提供有关设备如何运行的信息 使用此通信标准通过网络发布和接收仪表信息。注2:本标准定义了可用于M型接口或H1型接口的协议， 然而，H1接口不在CEN/TC 294的范围内。交叉引用:CEN/CLC/ETSI/TR 50572:2011IEE 802.15.4EN ISO/IEC 7498-1ISO/IEC 7498-1EN 13757-3EN 62056-5-3IEC 62056-5-3EN 62056-6-1IEC 62056-6-1EN 62056-6-2IEC 62056-6-2-2EN 300328:2015EN 14154购买本文件时可提供的所有现行修改件均包含在本文件中。

BS EN 16836-1:2016 gives provisions on the standardization framework of communication systems applicable to the exchange of data from metering devices to other devices within a mesh network. It includes information on the application process functions, layered protocols and metering architecture.This European Standard also specifies how to interpret Parts 2 and 3 of EN 16836 which give a list of references to the ZigBee documents. This standard is applicable to communications systems that involve messages and networking between a meter or multiple meters and other devices in a mesh network, such as in home displays (IHDs) and communications hubs. This standard allows routing between devices and also allows channel agility to avoid contention with other networks of the same type, or networks of other types operating in the same frequency bands.This standard is designed to support low power communications for devices such as gas and water meters which can make data from such devices available on the mesh network at any time through a proxy capability within a permanently powered deviceNOTE 1 This standard specifies a communication protocol that can embrace a multitude of smart metering architectures from a variety of countries. This standard is not designed to limit, or indeed imply a choice or preference to any one of the many possible architectures, but more over provide information on how devices can use this communications standard to publish and receive information from meters over a network.NOTE 2 This standard defines a protocol that can be used for either a type M interface, or a type H1 interface, however H1 interfaces are not within the scope of CEN/TC 294.Cross References:CEN/CLC/ETSI/TR 50572:2011IEEE 802.15.4EN ISO/IEC 7498-1ISO/IEC 7498-1EN 13757-3EN 62056-5-3IEC 62056-5-3EN 62056-6-1IEC 62056-6-1EN 62056-6-2IEC 62056-6-2EN 300328:2015EN 14154All current amendments available at time of purchase are included with the purchase of this document.