IEC 63137的本部分定义了标准试验射频（RF）的一般要求 连接器（0级），包括术语和定义、额定值和特性、概述 要求、测试方法、质量评估程序等。 标准测试射频（RF）连接器（0级）用于测量1级和 电气性能用2级射频连接器。通常，标准测试无线电频率 （RF）连接器（0级）是一端的适配器（通常为精密连接器接口） 可与测量设备和另一端连接（通常为标准 测试连接器接口），可与1级或2级连接器连接。 本规范适用于0级标准测试连接器（以下简称连接器）。交叉引用:IEC 61169-1-2HD 351.1 S1IEC 60617IEC 60457-1IEC 61169-1-4IEC 62153-4-4EN 61196（系列）HD 351.5 S1（系列）IEEE 287IEC 61196（所有部分）IEC 60457（所有部分）IEC 61196（系列）IEC 60419IEC 60457（系列）EN 61169- 1:2013IEC 61169-1:2013购买本文件时可获得的所有现行修订均包含在购买本文件中。

This part of IEC 63137 defines general requirements for standard test radio frequency (RF) connectors (grade 0), including terms and definitions, ratings and characteristics, general requirements, test methods, quality assessment procedures, and etc. Standard test radio frequency (RF) connectors (grade 0) are intended to measure grade 1 and grade 2 RF connectors for electrical performances. Typically, a standard test radio frequency (RF) connector (grade 0) is an adapter with one end (normally a precision connector interface) which can be connected with measurement equipment and the other end (normally a standard test connector interface) which can be connected with grade 1 or grade 2 connectors. This specification applies to grade 0 standard test connectors (called connector, hereinafter).Cross References:IEC 61169-1-2HD 351.1 S1IEC 60617IEC 60457-1IEC 61169-1-4IEC 62153-4-4EN 61196 (series)HD 351.5 S1 (series)IEEE 287IEC 61196 (all parts)IEC 60457 (all parts)IEC 61196 (series)IEC 60419IEC 60457 (series)EN 61169-1:2013IEC 61169-1:2013All current amendments available at time of purchase are included with the purchase of this document.