DIN EN 60512-16-9-电子设备连接器.试验和测量.第16-9部分:触点和终端的机械试验.试验16i:接地触点弹簧保持力（IEC 60512-16-9-2008）；德语版本EN 60512-16-9:2008-国家数字标准馆

现行 DIN EN 60512-16-9

到馆提醒

收藏跟踪

购买正版

Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 60512-16-9:2008 电子设备连接器.试验和测量.第16-9部分:触点和终端的机械试验.试验16i:接地触点弹簧保持力（IEC 60512-16-9-2008）；德语版本EN 60512-16-9:2008

发布日期： 2009-03-01

分类信息

发布单位或类别：德国-德国标准化学会

关联关系

研制信息

相似标准/计划/法规

BS 05/30140295 DC

IEC 60512-16-16. Connectors for electronic equipment. Tests and measurements. Part 16-16. Mechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs
IEC 60512-16-16 电子设备用连接器测试和测量第16-16部分触点和终端的机械试验测试16p 扭转强度固定凸耳

IEC 60512-16-16-2008

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs
电子设备连接器 - 测试和测量 - 第16-16部分:接触和终端的机械测试 - 测试16p:扭转强度固定公接头

IEC 60512-16-6-2008

Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
电子设备连接器 - 测试和测量 - 第16-6部分:触点和端子的机械测试 - 测试16F:终端的鲁棒性

IEC 60512-16-1-2008

Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
电子设备连接器 - 测试和测量 - 第16-1部分:触点和端子的机械测试 - 测试16a:探头损坏

IEC 60512-16-2-2008

Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry
电子设备连接器 - 测试和测量 - 第16-2部分:触点和端子上的机械测试 - 测试16b:限制输入

UNE-EN 60512-1-2003

Connectors for electronic equipment - Tests and measurements. Part 1: General.
电子设备用连接器.试验和测量第一部分:概述

BS 05/30140239 DC

IEC 60512-16-1. Connectors for electronic equipment. Tests and measurements. Part 16-1. Mechanical tests on contacts and terminations. Test 16a. Probe damage
IEC 60512-16-1 电子设备用连接器测试和测量第16-1部分触点和终端的机械试验测试16a 探针损伤

BS 05/30140246 DC

IEC 60512-16-2. Connectors for electronic equipment. Tests and measurements. Part 16-2. Mechanical tests on contacts and terminations. Test 16b. Restricted entry
IEC 60512-16-2 电子设备用连接器测试和测量第16-2部分触点和终端的机械试验测试16b 限制进入

BS 05/30140262 DC

IEC 60512-16-6. Connectors for electronic equipment. Tests and measurements. Part 16-6. Mechanical tests on contacts and terminations. Test 16f. Robustness of terminations
IEC 60512-16-6 电子设备用连接器测试和测量第16-6部分触点和终端的机械试验测试16f 引出端强度试验

IEC 60512-16-7-2008

Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
电子设备连接器 - 测试和测量 - 第16-7部分:触点和端子的机械测试 - 测试16g:压接后接触变形的测量

BS 05/30140266 DC

IEC 60512-16-7. Connectors for electronic equipment. Tests and measurements. Part 16-7. Mechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation after crimping
IEC 60512-16-7 电子设备用连接器测试和测量第16-7部分触点和终端的机械试验测试16g 压接后接触变形的测量

IEC 60512-16-3-2008

Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
电子设备连接器 - 测试和测量 - 第16-3部分:触头和端子的机械测试 - 测试16c:接触弯曲强度

IEC 60512-16-18-2008

Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
电子设备连接器 - 测试和测量 - 第16-18部分:触点和端子的机械测试 - 测试16r:触点偏转模拟

BS 05/30140305 DC

IEC 60512-16-18. Connectors for electronic equipment. Tests and measurements. Part 16-18. Mechanical tests on contacts and terminations. Test 16r. Deflection of male contacts in a connector insert by simulation
IEC 60512-16-18 电子设备用连接器测试和测量第16-18部分触点和终端的机械试验测试16r 模拟连接器插入件中公触点的偏转

BS 05/30140250 DC

IEC 60512-16-3. Connectors for electronic equipment. Tests and measurements. Part 16-3. Mechanical tests on contacts and terminations. Test 16c. Contact bending strength
IEC 60512-16-3 电子设备用连接器测试和测量第16-3部分触点和终端的机械试验测试16c 接触弯曲强度

IEC 60512-16-4-2008

Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
电子设备用连接器 - 试验和测量 - 第16-4部分:触点和端子的机械试验 - 试验16d:抗拉强度（卷曲连接）

BS 05/30140285 DC

IEC 60512-16-13. Connectors for electronic equipment. Tests and measurements. Part 16-13. Mechanical tests on contacts and terminations. Test 16m. Unwrapping, solderless wrapped connections
IEC 60512-16-13 电子设备用连接器测试和测量第16-13部分触点和终端的机械试验测试16m 展开、无焊缠绕连接

BS 05/30140254 DC

IEC 60512-16-4. Connectors for electronic equipment. Tests and measurements. Part 16-4. Mechanical tests on contacts and terminations. Test 16d. Tensile strength (crimped connections)
IEC 60512-16-4 电子设备用连接器测试和测量第16-4部分触点和终端的机械试验测试16d 抗拉强度（卷曲连接）

DIN EN 60512-16-16

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (IEC 60512-16-16:2008); German version EN 60512-16-16:2008
电子设备连接器.试验和测量.第16-16部分:触点和终端的机械试验.试验16p:固定凸耳扭转强度（IEC 60512-16-16-2008）；德语版本EN 60512-16-16:2008

BS EN 60512-10-4-2003

Connectors for electronic equipment. Tests and measurements-Test 10d. Electrical overload (connectors)
电子设备用连接器测试和测量

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统