现行

BS EN 1705-1997

Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow
塑料管道系统 热塑性塑料阀门 外部冲击后阀门完整性的试验方法

1997-05-15

现行

DIN EN 1705

Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
塑料管道系统.热塑性塑料阀门.外部吹扫后阀门完整性的试验方法；德文版EN 1705:1996

1997-01-01

现行

UNE-EN 1705-1998

PLASTIC PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER AN EXTERNAL BLOW.
塑料管道系统 热塑性塑料阀门 外部冲击后阀门完整性的试验方法

1998-07-15

现行

BS EN 917-1997

Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness
塑料管道系统 热塑性塑料阀门 耐内压和密封性试验方法

1997-07-15

现行

UNE-EN 917-1997

PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHODS FOR RESISTANCE TO INTERNAL PRESSURE AND LEAKTIGHTNESS.
塑料管道系统 热塑性塑料阀门 耐内压和密封性的试验方法

1997-06-18

现行

BS EN 1704-1997

Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending
塑料管道系统 热塑性塑料阀门 弯曲条件下温度循环后阀门完整性的试验方法

1997-06-15

现行

UNE-EN 1704-1997

PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHOD FOR THE INTEGRITY OF A VALVE AFTER TEMPERATURE CYCLING UNDER BENDING.
塑料管道系统 热塑性塑料阀门 弯曲条件下温度循环后阀门完整性的试验方法

1997-11-19

现行

BS 2782-11-METHOD 1121H-1996

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Thermoplastics pipes for the transport of liquids under pressure. Calculation of head losses
塑料的试验方法 热塑性塑料管道、配件和阀门 压力下液体输送用热塑性塑料管 水头损失的计算

1996-08-15

现行

BS 2782-11-METHOD 1108A-1989

Methods of testing plastics. Thermoplastics pipes, fittings and valves-True impact rate (TIR) boundaries of pipes
塑料的试验方法 热塑性塑料管、配件和阀门

1989-09-29

现行

UNE-EN 1053-1996

PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURe applications. Test method for watertightness.
塑料管道系统 非压力应用的热塑性塑料管道系统 水密性试验方法

1996-05-17

现行

UNE-EN 12061-1999

PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH.
塑料管道系统 热塑性塑料配件 冲击强度的试验方法

1999-12-31

现行

UNE-EN 1054-1996

PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPING SYSTEMS FOR SOIL AND WAste discharge. Test method for airtightness of joints.
塑料管道系统 土壤和废物排放用热塑性塑料管道系统 接头气密性试验方法

1996-05-17

现行

BS 2782-11-METHOD 1121C-1997

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series
塑料的试验方法 热塑性塑料管道、配件和阀门 流体输送用热塑性塑料管 标称外径和标称压力 基于英寸的系列

1997-06-15

现行

DIN EN 1704

Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
塑料管道系统.热塑性塑料阀门.弯曲温度循环后阀门完整性的试验方法；德文版EN 1704:1997

1997-03-01

现行

UNE-EN 744-1996

PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. TEST METHOD FOR RESISTANCE TO EXTERNAL BLOWS BY THE ROUND-THE-CLOCK METHOD.
塑料管道系统 热塑性塑料管 用全天候法测定抗外部冲击性的试验方法

1996-03-22

现行

UNE-EN 744-1997 ERRATUM

PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. TEST METHOD FOR RESISTANCE TO EXTERNAL BLOWS BY THE ROUND-THE-CLOCK METHOD.
塑料管道系统 热塑性塑料管 用全天候法测定抗外部冲击性的试验方法

1997-12-19

现行

UNE-EN 744-1996 ERRATUM

PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. TEST METHOD FOR RESISTANCE TO EXTERNAL BLOWS BY THE ROUND-THE-CLOCK METHOD.
塑料管道系统 热塑性塑料管 用全天候法测定抗外部冲击性的试验方法

1996-06-24

现行

BS 2782-11-METHOD 1109A-1989

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
塑料的试验方法 热塑性塑料管、配件和阀门

1989-10-31

现行

BS EN 802-1995

Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing
塑料管道系统 压力管道系统用注射成型热塑性塑料配件 用压碎法测定最大变形的试验方法

1995-07-15

现行

UNE-EN 802-1995

PLASTICS PIPING AND DUCTING SYSTEMS. INJECTION-MOULDED THERMOPLASTICS FITTINGS FOR PRESSURE PIPING SYSTEMS. TEST METHOD FOR MAXIMUN DEFORMATION BY CRUSHING.
塑料管道系统 压力管道系统用注射成型热塑性塑料配件 通过压碎实现最大变形的试验方法

1995-09-18