本欧洲标准规定了以下胶合层压产品的性能要求: - 胶合层压木材（胶合木）; - 固体木材; - 大手指关节胶合 - 胶合胶合胶 用于建筑物和桥梁。 还规定了最低生产要求，胶合层压产品的合格性和标识的评估和认证规定。 本欧洲标准适用于由本标准中列出的针叶树种制成的胶合层压木材或由两层或多层厚度为6mm至45mm（包括）的叠层组成的杨树。 根据本欧洲标准的某些规定，可以生产由特定硬木种类制成的胶合胶。在这种情况下，附件ZA不适用。 本欧洲标准适用于由本标准中列出的针叶树种制成的胶合实木，或由厚度大于45毫米且小于或等于85毫米的两至五个叠片组成的杨树。 该欧洲标准适用于手指长度至少为45 mm的胶合层压木材中的大手指关节。 本欧洲标准适用于具有实心矩形横截面的胶合胶合胶。 该欧洲标准还给出了胶合层压板的要求

This European Standard sets the performance requirements of the following glued laminated products: - Glued laminated timber (glulam); - Glued solid timber; - Glulam with large finger joints; - Block glued glulam for use in buildings and bridges. It also lays down minimum production requirements, provisions for evaluation and attestation of conformity and marking of glued laminated products. This European Standard is applicable for glued laminated timber made of coniferous species listed in this standard or poplar consisting of two or more laminations having a thickness from 6 mm up to 45 mm (inclusive). It may be possible to produce glulam made from specific hardwood species based on some provisions of this European Standard. In this case, Annex ZA does not apply. This European Standard is applicable for glued solid timber made of coniferous species listed in this standard or poplar consisting of two to five laminations having a thickness greater than 45 mm and less than or equal to 85 mm. This European Standard is applicable for large finger joints in glued laminated timber with a finger length of at least 45 mm. This European Standard is applicable for block glued glulam having solid rectangular cross sections. This European Standard also gives the requirements for glued laminated products treated against biological attack. Glued laminated products treated with fire retardants are not covered.