声学 水听器低频校准方法
Acoustics—Low frequency calibration methods of hydrophones

2017-11-01

Underwater acoustics. Hydrophones. Calibration of hydrophones-Procedures for low frequency pressure calibration
水下声学 水听器 水听器的校准

2020-05-11

Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration
水下声学 - 水听器 - 水听器的校准 第2部分:低频压力校准程序

2019-09-19

声学 高频水听器校准
Acoustics--Calibration of high frequency hydrophone

1995-07-03

声学 水听器加速度灵敏度校准方法
Acoustics--Calibration method of hydrophone acceleration sensitivity

1998-03-18

Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration (IEC 60565-2:2019); German version EN IEC 60565-2:2019
水下声学.水听器.水听器的校准.第2部分:低频压力校准程序（IEC 60565-2-2019）；德文版EN IEC 60565-2:2019

2022-01-01

声学 在0.5～15 MHz频率范围内的超声场特性及其测量水听器法
Acoustics--Measurement and characterisation of ultrasonic fields in the frequency range 0.5MHz to 15MHz--Hydrophone method

1996-09-09

1 kHz~10 kHz矢量水听器校准规范(自由场比较法)
Calibration Specification for Vector Hydrophones in Frequency Range 1 kHz to 10 kHz(Free-field Comparison Method)

2016-11-25

Государственная система обеспечения единства измерений. Гидрофоны. Общие требования к методикам калибровки в частотном диапазоне до 40 МГц
确保测量一致性的状态系统 水龙头在40 MHz频率范围内的校准方法的一般要求

Calibration of vibration and shock pick-ups-Method for primary vibration calibration at low frequencies
振动和冲击传感器的校准 一次低频振动校准方法

1994-03-15

高静水压下20 Hz～3.15 kHz标准水听器(耦合腔互易法)
Standard Hydrophones in the Frequency Range 20 Hz to 3.15 kHz under High Hydrostatic Pressure(Acoustic Coupler Reciprocity Method)

2010-03-02

Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements-Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
声学和振动 弹性元件振动声传递特性的实验室测量

2009-08-31

Государственная система обеспечения единства измерений. Ваттметры СВЧ малой мощности диапазона частот 0,02-178,6 ГГц. Методика поверки и калибровки
为了确保测量的一致性国家制度 功率表UHF频段低功耗0,02-178,6千兆赫 检定 校准方法

2000-06-22

음향·진동 — 탄성체 진동음의 전달특성에 대한 시험실 측정 — 제5부: 병진 운동에 대한 탄성지지의 저주파 전달 강성 결정을 위한 구동점 방법
声学和振动 - 弹性元件的振动声学传递特性的实验室测量 - 第5部分:用于确定弹性支持的低频传递刚度的驱动点方法

2019-10-28

Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
声学与振动——弹性元件振动声传递特性的实验室测量Spart 5:测定平动弹性支承低频传递刚度的驱动点法

2008-08-05

声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分：弹性支撑件低频平动动刚度的驱动点测量方法
Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion

2017-11-01

ISO 10846-5. Acoustics and vibration. Laboratory measurement of vibro- acoustic transfer properties of resilient elements. Part 5. Low frequency dynamic stiffness of elastic supports for translatory motion (Driving point method)
ISO 10846-5 声学和振动 弹性元件振动声传递特性的实验室测量 第五部分 平动弹性支承的低频动刚度（驱动点法）

2005-11-24

Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)
声学和振动.弹性元件振动声传递特性的实验室测量.第5部分:平动弹性支承低频传递刚度测定的驱动点法（ISO 10846-5-2008）；德文版EN ISO 10846-5:2009

2009-07-01

Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)
声学和振动.弹性元件振动声传递特性的实验室测量.第5部分:平动弹性支承低频传递刚度测定的驱动点法（ISO 10846-5-2008）

2009-10-07

Вибрация. Измерения виброакустических передаточных характеристик упругих элементов конструкций в лабораторных условиях. Часть 5. Метод входной частотной характеристики для определения переходной динамической жесткости упругих опор в области низких частот для поступательной вибрации
机械振动 弹性元件振动声学传递特性的实验室测量 第5部分:用于确定平移运动的弹性支架的低频传递刚度的驱动点方法