ISO 11148-3:2012适用于手持式非电动工具（以下简称“钻头和攻丝器”），用于在各种材料（例如木材、金属、混凝土和塑料）上旋转钻孔，或用于攻丝和清洁金属和塑料中的螺纹。钻孔机和攻丝机可由压缩空气、液压油或内燃机驱动，供一名操作员使用，并由操作员的手支撑，带或不带悬架，例如平衡器。 ISO 11148-3:2012适用于钻头、双手柄重型钻头和攻丝器。 ISO 11148-3:2012不适用于在夹具中安装钻头和攻丝的特殊要求和修改。 ISO 11148-3:2012规定了当钻头和攻丝按预期使用时，以及在制造商合理预见的误用条件下使用时，所有重大危险、危险情况或危险事件，但在潜在爆炸性环境中使用除外。

ISO 11148-3:2012 applies to hand-held non-electric power tools (hereinafter "drills and tappers") intended for rotary drilling of holes in all kinds of material, e.g. wood, metal, concrete and plastics, or for tapping and cleaning threads in metal and plastics. The drills and tappers can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operator's hand or hands, with or without a suspension, e.g. a balancer. ISO 11148-3:2012 is applicable to drills, heavy duty drills with two handles and tappers. ISO 11148-3:2012 is not applicable to special requirements and modifications of drills and tappers for the purpose of mounting them in fixtures. ISO 11148-3:2012 deals with all significant hazards, hazardous situations or hazardous events when drills and tappers are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer, with the exception of their use in potentially explosive atmospheres.