BS EN 61169-52:2015是分规范（SS），提供了信息和规则 用于制备带卡扣式射频同轴连接器的详细规范（DS） 耦合，通常用于50Ω电缆网络（MMCX）。它规定了通用连接器的配合面尺寸——2级，尺寸 0级标准测试连接器的详细信息、测量信息和从中选择的测试 IEC 61169-1，适用于与MMCX系列射频连接器有关的所有详细规范。本规范说明了在以下情况下应考虑的推荐性能特征: 编写一份详细规范，其中包括试验计划和检验要求 评估等级M和H.MMCX微型卡扣式耦合结构系列R.F.同轴连接器 标准阻抗50Ω的特性适用于各种射频电缆和 条状物。工作频率限制高达6 GHz。注:公制尺寸为原始尺寸。所有未标注尺寸的图形配置仅供参考。交叉引用:IEC 61169-1:2013IEC 60068-1IEC 62037EN 60068-1EN 61169-1:2013EN 62037购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN 61169-52:2015, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with snap-on coupling, typically for use in 50 Ω cable networks (MMCX).It prescribes mating face dimensions for general purpose connectors - grade 2, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series MMCX RF connectors.This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.The MMCX miniature snap-on coupling structure series R.F. coaxial connector with the characteristic of normative impedance 50 Ω are used with various kinds of R.F cables and strips. The operating frequency limit is up to 6 GHz.NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only.Cross References:IEC 61169-1:2013IEC 60068-1IEC 62037EN 60068-1EN 61169-1:2013EN 62037All current amendments available at time of purchase are included with the purchase of this document.