Performance Specification & Assessment Procedure for Elastomeric Toroidal Sealing Rings (Fluorocarbon).
弹性环形密封圈（氟碳化合物）的性能规范和评估程序

2004-12-01

Elastomeric Toroidal Sealing Rings (O rings) Manufacturing & Inspection Standards for Aerospace Applications
航空航天用弹性环形密封圈（O形圈）制造和检验标准

2004-12-01

Specification for elastomeric toroidal sealing rings ('O'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996
符合BS 6996的丙烯腈-丁二烯橡胶制造的弹性环形密封圈（“O”形密封圈）规范

1990-08-31

Draft Document - Aerospace series; limits of surface imperfections of elastomeric toroidal sealing rings (o-rings)
文件草案——航空航天系列；弹性环形密封圈（o型圈）表面缺陷限值

1990-04-01

Кольца резиновые уплотнительные круглого сечения для гидравлических и пневматических устройств. Конструкция и размеры
用于液压和气动设备的橡胶环形密封圈 施工和尺寸

Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from fluorosilicone rubber material released to BS F 154. Specification
由符合BS F 154的氟硅橡胶材料制成的弹性环形密封圈（“O”形密封圈）的性能 规格

2006-10-31

Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from ethylene-propylene rubber material conforming to BS F 156. Specification
由符合BS F 156的乙丙橡胶材料制成的弹性环形密封圈（“O”形密封圈）的性能 规格

2006-10-31

Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from oil resistant silicone rubber material conforming to BS F 153. Specification
由符合BS F 153的耐油硅橡胶材料制成的弹性环形密封圈（“O”形密封圈）的性能 规格

2006-10-31

Пакеты двухкассетных пресс-форм для изготовления резиновых колец круглого сечения. Конструкция и размеры
一套用于制造橡胶环形密封圈的两盒式压模 设计和尺寸

BS F 158. Properties of elastomeric torodial sealing rings ('O' rings) manufactured from fluorocarbon rubber material. Specification
英国标准F158 由氟碳橡胶材料制成的弹性环形密封圈（“O”形密封圈）的性能 规格

2005-07-11

Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
平面O形密封圈液压联轴器接口尺寸规范

1991-04-30

BS F 163. Properties of elastomeric torodial sealing rings ('O' rings) manufactured from fluorocarbon low compression set rubber material. Specification
BS F 163 由氟碳低压缩永久变形橡胶材料制成的弹性环形密封圈（“O”形密封圈）的性能 规格

2005-07-11

BS F 160. Properties of elastomeric torodial sealing rings ('O' rings) manufactured from butadiene-acrylonitrile mineral oil resistant rubber material. Specification
英国标准F160 由丁二烯-丙烯腈矿物耐油橡胶材料制成的弹性环形密封圈（“O”形密封圈）的性能 规格

2005-07-11

Gland Design Criteria and Dimensions for Static Radial O-Ring Seal Applications Without Anti-Extrusion Devices Specifically for Engine and Engine Control Systems
无防挤压装置的静态径向O形密封圈应用的压盖设计标准和尺寸 专用于发动机和发动机控制系统

2020-11-30

Gland Design Criteria and Dimensions for Dynamic Radial O-Ring Seal Applications Specifically for Engine and Engine Control Systems Operating at 1500 psi Max
动态径向O形密封圈应用的压盖设计标准和尺寸 特别适用于在最大1500 psi压力下运行的发动机和发动机控制系统

2021-04-14

Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
O形密封圈端面密封连接器规范:第3部分:钢活接头、隔板、旋转接头、钎焊套管、盖和带SAE J1926-2英寸螺柱端头的连接器的要求、尺寸和试验

2012-06-29

Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Braze-on Tube Ends, Caps, and Connectors with ISO 6149-2 Metric Stud Ends and ISO 6162 4-Bolt Flange Heads
O形圈端面密封连接器规范:第2部分:钢活接头、舱壁、旋转接头、钎焊套管、管端钎焊、管帽和带有ISO 6149-2公制螺柱端和ISO 6162 4螺栓法兰头的连接器的要求、尺寸和试验

2015-04-30