1.1 本指南讨论了混凝土产品的微生物诱导腐蚀（MIC）和确定混凝土抗MIC能力的实验室试验方法。尽管本指南适用于混凝土产品，但也涵盖了用于专业应用或实验室研究的水泥砂浆和糊料。 1.2 虽然本指南讨论了混凝土材料和外加剂，但本文件并不是专门针对现场暴露条件或污水管、混凝土罐或混凝土立管网络设计。 1.3 本指南不包括在下水道中监测混凝土试件或其他样本的现场试验。 1.4 本指南不涵盖化学硫酸盐侵蚀引起的混凝土劣化，化学硫酸盐侵蚀是由废水中存在的硫酸盐化合物与水泥水化产物反应引起的。测试方法提供了评估硫酸盐侵蚀的测试方法 C452型 和 C1012/C1012M . 1.5 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.6 本指南正文引用了提供解释性材料的注释和脚注。这些注释和脚注（不包括表和图中的注释和脚注）不应视为本标准的要求。 1.7 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.8 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This guide discusses microbially induced corrosion (MIC) of concrete products and laboratory test methods for determining the resistance of concrete to MIC. Although the guide is intended for concrete products, it also covers cementitious mortar and paste that are used in specialized applications or laboratory investigations. 1.2 While this guide discusses concrete materials and admixtures, the document is not intended to specifically address field exposure conditions or sewage pipe, concrete tank, or concrete riser network design. 1.3 This guide does not cover live trial tests where concrete coupons or other specimens are monitored in sewers. 1.4 This guide does not cover concrete deterioration due to chemical sulfate attack, which is caused by the reaction of sulfate compounds that exist in wastewater with the hydration products of cement. Test methods for assessing sulfate attack are provided by Test Methods C452 and C1012/C1012M . 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 The text of this guide references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.