AS/NZS 2341.10:2015-沥青和相关筑路产品的试验方法方法10:测定热和空气对沥青移动膜的影响（滚动薄膜烘箱（RTFO）试验）-国家数字标准馆

现行 AS/NZS 2341.10:2015

到馆阅读

收藏跟踪

购买正版

Methods of testing bitumen and related roadmaking products, Method 10: Determination of the effect of heat and air on a moving film of bitumen (rolling thin film oven (RTFO) test) 沥青和相关筑路产品的试验方法方法10:测定热和空气对沥青移动膜的影响（滚动薄膜烘箱（RTFO）试验）

发布日期： 2015-09-28

阐述了沥青粘合剂的处理方法，旨在模拟使用粘合剂制造热混合沥青时获得的条件。本试验方法规定的处理前后粘合剂性能的变化可通过几种方式确定。该方法可测定被测样品的质量变化，并使处理后的残留物可用于进一步测试。

Sets out a treatment of bituminous binders which is intended to simulate the conditions obtained when the binders are used to manufacture hot-mixed asphalt. The change in the binder properties prior to and after treatment as specified by this test method may be determined in several ways. This method determines the change in mass of the sample under test and in addition makes a treated residue available for further testing.

分类信息

发布单位或类别：澳大利亚-澳大利亚/新西兰标准

关联关系

研制信息

相似标准/计划/法规

AS 2341.14-2013

Methods of testing bitumen and related roadmaking products, Method 14: Determination of flashpoint of bitumen
沥青和相关筑路产品的试验方法方法14:沥青闪点的测定

AS 2341.11-1994[ Obsolescent ]

Methods of testing bitumen and related roadmaking products - Determination of ductility
沥青和相关筑路产品的试验方法.延展性的测定

AS/NZS 2341.21-2015

Methods of testing bitumen and related roadmaking products, Method 21: Sample preparation
沥青和相关筑路产品的试验方法方法21:样品制备

AS 2341.12-2020

Methods of testing bitumen and related roadmaking products, Method 12: Determination of penetration
沥青和相关筑路产品的试验方法方法12:渗透性测定

AS 2341.25-2002

Methods of testing bitumen and related roadmaking products, Method 25: Determination of consistency
沥青和相关筑路产品的试验方法方法25:稠度测定

AS 2341.26-2020

Methods of testing bitumen and related roadmaking products, Method 26: Determination of sieve residue
沥青和相关筑路产品的试验方法方法26:筛余物的测定

AS/NZS 2341.22-1996

Methods of testing bitumen and related roadmaking products, Method 22: Determination of particle charge
沥青和相关筑路产品的试验方法方法22:颗粒电荷的测定

AS/NZS 2341.8-2016

Methods of testing bitumen and related roadmaking products, Method 8: Determination of matter insoluble in toluene
沥青和相关筑路产品的试验方法方法8:甲苯不溶物的测定

AS 2341.32-2008

Methods of testing bitumen and related roadmaking products, Method 32: Determination of pH of bituminous emulsions
沥青和相关筑路产品的试验方法方法32:沥青乳液pH值的测定

AS/NZS 2341.23-2002

Methods of testing bitumen and related roadmaking products, Method 23: Determination of residue from evaporation
沥青和相关筑路产品的试验方法方法23:蒸发残渣的测定

AS/NZS 2341.1-1994[ Pending Revision ]

Methods of testing bitumen and related roadmaking products, Part 1: Precision data - Definitions
沥青和相关筑路产品的试验方法第1部分:精度数据定义

Methods of testing bitumen and related roadmaking products, Method 4: Determination of dynamic viscosity by rotational viscometer
沥青和相关筑路产品的试验方法方法4:用旋转粘度计测定动态粘度

AS/NZS 2341.13-1997

Methods of testing bitumen and related roadmaking products, Method 13: Long-term exposure to heat and air
沥青和相关筑路产品的试验方法方法13:长期暴露在高温和空气中

AS 2341.29-1996

Methods of testing bitumen and related roadmaking products, Method 29: Determination of breaking behaviour by setting time
沥青和相关筑路产品的试验方法方法29:通过凝固时间测定断裂性能

Methods of testing bitumen and related roadmaking products, Method 9: Determination of water content (Dean and Stark)
沥青和相关筑路产品的试验方法方法9:水含量的测定（Dean和Stark）

Methods of testing bitumen and related roadmaking products, Method 7: Determination of density using a density bottle
沥青和相关筑路产品的试验方法方法7:使用密度瓶测定密度

AS 2341.30-2021

Methods of testing bitumen and related roadmaking products, Method 30: Recovery of residue from bituminous emulsion
沥青和相关筑路产品的试验方法方法30:从沥青乳液中回收残渣

AS/NZS 2341.20-2016

Methods of testing bitumen and related roadmaking products, Method 20: Determination of sieve residue for bituminous materials
沥青和相关筑路产品的试验方法方法20:沥青材料筛余物的测定

AS/NZS 2341.30-1996

Methods of testing bitumen and related roadmaking products, Method 30: Recovery of residue from bituminous emulsion
沥青和相关筑路产品的试验方法方法30:从沥青乳液中回收残渣

AS 2341.18-2020

Methods of testing bitumen and related roadmaking products, Method 18: Determination of softening point (ring and ball method)
沥青和相关筑路产品的试验方法方法18:软化点的测定（环球法）

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统