BS EN 60068-2-18:2017提供了适用于以下产品的试验方法: 运输、储存或使用过程中，可能会受到水滴落下的影响， 浸没或高压水冲击。水测试的主要目的是验证 外壳、盖子和密封件保持部件和设备处于良好状态的能力 必要时，在标准化滴场或浸入水中后的工作顺序 水这些试验不是腐蚀试验，不能作为腐蚀试验来考虑和使用。其他标准中已确定的水试验并不旨在模拟自然降雨和降雨 它们引用的强度太高，无法用于该目的。所以除了 高强度严酷度试验R包括基于自然降雨的人工降雨试验 但不考虑通常与自然降雨有关的高风速。对测试的适用性和选择的严重性给出了指导。交叉引用:IEC 60529:1989 Cons Ed 2-1购买时可用的所有现行修订均包含在本文件的购买中。

BS EN 60068-2-18:2017 provides methods of test applicable to products which, during transportation, storage or in service, can be subjected to falling water drops, impacting water, immersion or high pressure water impact. The primary purpose of water tests is to verify the ability of enclosures, covers and seals to maintain components and equipment in good working order after and, when necessary, under a standardized drop field or immersion in water.These tests are not corrosion tests and cannot be considered and used as such.Established water tests in other standards are not intended to simulate natural rainfall and their quoted intensities are too high to be adopted for that purpose. Therefore, in addition to the high-intensity severities, test R includes an artificial rain test based upon natural conditions but not taking into account high wind speeds generally associated with natural rain.Guidance is given on the applicability of the tests and the severities to be selected.Cross References:IEC 60529:1989 Cons Ed 2-1All current amendments available at time of purchase are included with the purchase of this document.