前言这是CSA集团和UL标准的统一标准，适用于二次电池和含有碱性或其他非酸性电解质的电池——便携式密封二次电池和由其制成的用于便携式应用的电池的安全要求。这是CAN/CSA-C22的第二版。2号62133和UL 62133的第二版。此版本的CAN/CSA-C22。2第62133号文件取代了2013年11月发布的前一版CAN/CSA-E62133（采用IEC 62133:2012）。本版UL 62133将取代2015年1月9日发布的前一版。本协调标准基于IEC出版物62133:第二版二次电池和含有碱性或其他非酸性电解质的电池-便携式密封二次电池和由其制成的用于便携式应用的电池的安全要求12: 2012年，根据2013年6月发布的IEC勘误表1修订。IEC出版物62133的版权归IEC所有。范围本国际标准规定了含有碱性或其他非酸性电解液的便携式密封二次电池和电池（按钮除外）在预期用途和合理可预见的误用情况下安全运行的要求和试验。1DV。1 D1修改，在第1条中添加以下段落和注释:本标准本身通常不适用于评估最终产品的安全性，因为它缺乏关于充电、正常负载的影响、，应考虑的异常情况以及最终产品预期环境中遇到的物理和电磁应力。注:带有附加功能或电路（包括便于充电的集成电路）的电池组被视为终端- 产品。1DV。2 DR修改，将以下段落添加到第1条（仅限加拿大）:本标准涉及根据CAN/CSA-C22使用的覆盖部件。2号，0号。

PrefaceThis is the harmonized CSA Group and UL standard for Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications. It is the second edition of CAN/CSA-C22.2 No. 62133, and the second edition of UL 62133. This edition of CAN/CSA-C22.2 No. 62133 supersedes the previous edition published November 2013 as CAN/CSA-E62133 (adopted IEC 62133:2012). This edition of UL 62133 supersedes the previous edition published on January 9, 2015. This harmonized standard is based on IEC Publication 62133: second edition Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications issued 12:2012, as revised by IEC Corrigendum 1 issued 06:2013. IEC publication 62133 is copyrighted by the IEC.ScopeThis International Standard specifies requirements and tests for the safe operation of portable sealed SECONDARY CELLS and batteries (other than button) containing alkaline or other non-acid electrolyte, under INTENDED USE and REASONABLY FORESEEABLE MISUSE.1DV.1 D1 Modification to add the following paragraph and note to Clause 1: This standard is not, by itself, generally suitable for the evaluation of the safety of end-products, as it lacks specific requirements regarding charging, the effect of normal loads, abnormal conditions that should be considered and the physical and electromagnetic stresses encountered in the anticipated environment of the end-product. NOTE Battery packs with additional features or circuitry, including integral circuitry that facilitates charging, are considered to be end-products. 1DV.2 DR Modification to add the following paragraph to Clause 1 (Canada only): This standard deals with the covered components used in accordance with CAN/CSA-C22.2 No. 0.