1.1 本规程描述了测定交通漆干膜对特定碳氢溶剂或汽油燃料试验流体作用的阻力的实验室程序。 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。 =====意义和用途====== 4.1 交通漆必须具有良好的抗机油和燃油滴落在高速公路上的能力。本试验方法描述了评估交通漆对参考试验流体的阻力所需的程序，以模拟此类作用。

1.1 This practice describes a laboratory procedure for determining the resistance of a dried film of traffic paint to the action of a specified hydrocarbon solvent or gasoline fuel test fluid. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 Traffic paints must have good resistance to motor oil and fuel drippings on the highway. This test method describes the procedure necessary to evaluate the resistance of traffic paint to reference test fluids in order to simulate this type of action.