Testing hardened concrete - Part 3: Compressive strength of test specimens
硬化混凝土的试验.第3部分:试样的抗压强度

2009-09-16

BS EN 12390-3. Testing hardened concrete. Part 3. Compressive strength of test specimens
BS EN 12390-3 测试硬化混凝土 第三部分 试样的抗压强度

2008-06-26

Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines.
硬化混凝土试验.第4部分:抗压强度.试验机规范

2001-01-31

Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines
硬化混凝土试验.第4部分:抗压强度.试验机规范

2019-10-02

Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete
喷射混凝土试验.第2部分:新喷射混凝土的抗压强度

2007-07-18

Grouts for tiles - Part 3: Determination of flexural and compressive strength
瓷砖用灰浆.第3部分:弯曲和抗压强度的测定

2009-09-09

Testing hardened concrete - Part 5: Flexural strength of test specimens
测试硬化混凝土 - 第5部分:试样的弯曲强度

2019-06-26

METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR
圬工用砂浆的试验方法.第11部分:硬化砂浆弯曲和抗压强度的测定

2000-03-28

Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete
喷射混凝土试验.第2部分:新喷射混凝土的抗压强度；德文版EN 14488-2:2006

2006-09-01

BS 1881-119. Testing concrete. Part 119. method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
英国标准1881-119 测试混凝土 第119部分 用弯曲破坏的梁部分测定抗压强度的方法（等效立方体法）

2011-07-01

유리섬유강화 플라스틱－로빙 강화 수지로 만든 봉의 기계적 물성의 측정－제3부：압축 강도
纺织玻璃钢粗纱增强树脂棒力学性能的测定第3部分:抗压强度的测定

2012-12-22

Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin — Part 3: Determination of compressive strength
纺织玻璃钢——粗纱增强树脂棒机械性能的测定第3部分:抗压强度的测定

2003-09-29

Изделия огнеупорные с общей пористостью менее 45 %. Метод определения предела прочности при сжатии при комнатной температуре. Часть 1. Испытание без применения прокладок
具有小于45％真实孔隙率的耐火产品 室温下抗压强度测定方法 第1部分没有包装测试

유리섬유강화 플라스틱 — 로빙 강화 수지로 만든 봉의 기계적 물성의 측정 — 제3부: 압축 강도
纺织玻璃纤维增强塑料.粗纱增强树脂棒机械性能的测定.第3部分:抗压强度的测定

2022-12-19

Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
电子设备连接器 - 测试和测量 - 第16-17部分:触点和端子的机械测试 - 测试16q:拉伸和抗压强度 固定公接头

2008-07-21