1.1 本规范涵盖了鞋类性能的最低要求，以防止可能导致伤害的各种工作场所危险。 1.2 本规范不作为详细的制造或采购规范，但可在采购合同中参考，以确保满足最低性能要求。 1.3 用于确定是否符合本规范性能要求的受控实验室测试不应被视为确定个人可能接触的所有情况下的性能水平。 1.4 对安全脚趾鞋的原始部件的任何更改，如更换或添加售后鞋垫/插入物，或转售鞋，都可能导致不符合本标准，从而导致ASTM标记无效。 1.5 本规范不适用于带安全鞋头的套鞋或带安全脚趾的系带装置。 1.6 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.7 本标准并不旨在解决与其使用相关的所有安全问题（如有）。 本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.8 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers minimum requirements for the performance of footwear to provide protection against a variety of workplace hazards that can potentially result in injury. 1.2 This specification is not intended to serve as a detailed manufacturing or purchasing specification, but can be referenced in purchase contracts to ensure that minimum performance requirements are met. 1.3 Controlled laboratory tests used to determine compliance with the performance requirements of this specification shall not be deemed as establishing performance levels for all situations to which individuals may be exposed. 1.4 Any changes to the original components of safety toe footwear such as replacing or adding after-market footbeds/inserts, or resoling of the footwear, could cause failure to meet this standard rendering the ASTM marking invalid. 1.5 This specification is not applicable to overshoes with safety toe caps or strap on devices with safety toes. 1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.