1.范围1。1本标准规定了实验室根据《安大略省环境保护法》第309号安大略省法规提交的废物样品进行分析测量和测试的准备情况。1.2本标准规定，希望根据安大略省第309条开展工作的实验室应记录其组织结构、人力资源、物理设施、标准操作规程、分析程序、样品和数据管理，以及与第309条活动相关的其他标准操作规程。1.3本标准规定了根据第309条（见图1）对工业废物进行表征所需的试验程序。 1.4本标准规定了在需要进行分析量化的情况下，为表征工业废物含量而推荐的附加程序。本标准包括测定渗滤液毒性、物理、无机和有机成分的试验方法。1.5本标准还确定了在程序未另行规定的情况下进行试验时应遵循的原则。1.6本标准还包含关于实验室组织、质量保证、人员、实验室设施、设备、物资和数据管理的条款。1.7以下规范是为一个大型实验室编写的，该实验室进行多种测试和分析。 实施某些规范的需要可能取决于实验室的规模或专业化程度。1.8现场取样是废物特性化的一个重要方面。取样协议是必要的。然而，本文件不包括现场取样本身。

1. Scope1.1This Standard specifies the basis upon which a laboratory can establish its readiness to perform analytical measurements and testing of waste samples submitted with respect to Ontario Regulation 309 under the Environmental Protection Act of Ontario.1.2This Standard specifies that a laboratory wishing to perform work under Ontario Regulation 309 shall document its organizational structure, human resources, physical facilities, standard operating practices, analytical procedures, sample and data management, and other standard operating practices as they relate to Regulation 309 activities.1.3This Standard specifies those test procedures which are required for characterizing industrial wastes under Regulation 309 (see Figure 1).1.4This Standard specifies additional procedures that are recommended for the purpose of characterizing industrial waste contents where analytical quantification is required. Test methods to determine leachate for its toxicity, physical, inorganic and organic constituents are included in this Standard.1.5This Standard also identifies the principles to be followed in performing tests where procedures are not otherwise specified.1.6This Standard also contains clauses on laboratory organization, quality assurance, personnel, laboratory facilities, equipment, supplies, and data management.1.7The following specifications have been written for a large laboratory carrying out many and varied tests and analyses. The need to implement some of the specifications may depend on the size or degree of specialization of the laboratory.1.8Field sampling is an important aspect of the c haracterization of waste. A protocol on sampling is necessary. However, this document does not cover field sampling per se.