IEC 60214的本部分旨在帮助选择根据IEC 60214-1或IEEE Std C57设计的分接开关。131用于变压器或电抗器的抽头绕组。与IEC 60214-1或IEEE Std C57相关的要求、参考和定义。第4条给出了131个，并说明了它们的用途。它还旨在帮助理解各种类型的分接开关及其可用的相关设备。这些应用指南涵盖有载分接开关 （电阻器和电抗器类型）和断电分接开关。交叉引用:IEC 60214- 1:2014IEC 60076-5:2006IEC 60076-1:2011IEC 60076-3:2011IEC 60076-3:2013IEC 60814ASTM D1533IEC 60076-7IEC 60567IEC 6056IEC 60156IEC 60296IEC 60296IEC 60050-421ASTM D877/D877M-2013IEC 60076-11IEC 60076-21ASTM D3487IEC 60076-6IEC 6199IEC 61203IEC 61203IEC 60422IEC 60422IEC 6076-15IEC 62770IEC D1616161616IEC 60475IEC 60599购买本文件时可提供的所有现行修改件均包括在购买时。

This part of IEC 60214 is intended to assist in the selection of tap-changers designed in accordance with IEC 60214-1 or IEEE Std C57.131 for use in conjunction with the tapped windings of transformers or reactors. Requirements, references and definitions relevant to either IEC 60214-1 or IEEE Std C57.131 are given and their use is described in Clause 4. It is also intended to assist in understanding the various types of tap-changers and their associated equipment available. These application guidelines cover on-load tap-changers (resistor and reactor types) and de-energized tap-changers.Cross References:IEC 60214-1:2014IEC 60076-5:2006IEC 60076-1:2011IEC 60076-3:2013IEC 60814ASTM D1533IEC 60076-7IEC 60567IEC 60156IEC 60296IEC 60050-421ASTM D877 / D877M-2013IEC 60076-11IEC 60076-21ASTM D3487IEC 60076-6IEC 61099IEC 61203IEC 60422IEC 60076-15IEC 62770ASTM D1816IEC 60475IEC 60599All current amendments available at time of purchase are included with the purchase of this document.