BS EN 10226-1:2004-在螺纹上形成压力密封接头的管道螺纹锥形外螺纹和平行内螺纹尺寸、公差和名称-国家数字标准馆

现行 BS EN 10226-1:2004

到馆阅读

收藏跟踪

购买正版

Pipe threads where pressure tight joints are made on the threads-Taper external threads and parallel internal threads. Dimensions, tolerances and designation 在螺纹上形成压力密封接头的管道螺纹锥形外螺纹和平行内螺纹尺寸、公差和名称

发布日期： 2010-10-31

                交叉引用:prEN 10226-3EN ISO 228-1ISO 228-1:2000 ISO 7-1prEN 10226-2部分取代了BS 21:1985。

Cross References:prEN 10226-3EN ISO 228-1ISO 228-1:2000ISO 7-1prEN 10226-2Partially replaces BS 21:1985.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS EN 10226-2-2005

Pipe threads where pressure tight joints are made on the threads-Taper external threads and taper internal threads. Dimensions, tolerances and designation
在螺纹上形成压力密封接头的管道螺纹

米制密封螺纹
Metric threads where pressure-tight joints are made on the threads

55°非密封管螺纹
Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

GB/T 12716-2011

60°密封管螺纹
Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads

GB/T 29537-2013

80°非密封管螺纹
Pipe threads with 80 degree thread angle where pressure-tight joints are not made on the threads

Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
螺纹上有压力密封接头的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸公差和名称；德文版EN 10226-2:2005

UNE-EN 10226-2-2005

Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
螺纹上有压力密封接头的管螺纹.第2部分:锥形外螺纹和锥形内螺纹.尺寸公差和名称

KS B ISO 7-1(2017 Confirm)

나사 압력 죔 이음쇠용 관나사－치수, 허용오차 및 호칭
螺纹上有压力密封接头的管螺纹尺寸、公差和名称

KS B ISO 7-1(2022 Confirm)

나사 압력 죔 이음쇠용 관나사－치수, 허용오차 및 호칭
螺纹上形成压力密封接头的管螺纹－尺寸、公差和名称

BS EN ISO 228-1-2003

Pipe threads where pressure-tight joints are not made on the threads-Dimensions, tolerances and designation
未在螺纹上进行压力密封接头的管道螺纹

GB/T 7306.2-2000

55°密封管螺纹第2部分:圆锥内螺纹与圆锥外螺纹
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads

JB/T 10031-2019

55°密封管螺纹量规
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads

GB/T 10922-2006

55°非密封管螺纹量规
Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

BS EN 10226-3-2005

Pipes threads where pressure-tight joints are made on the threads-Verification by means of limit gauges
管道螺纹螺纹上有压力密封接头通过极限量规进行验证

BS EN ISO 228-2-2003

Pipe threads where pressure-tight joints are not made on the threads-Verification by means of limit gauges
未在螺纹上进行压力密封接头的管道螺纹

Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
螺纹上有压力密封接头的管螺纹.第1部分:锥形外螺纹和平行内螺纹.尺寸公差和名称；德文版EN 10226-1:2004

UNE-EN 10226-1-2004

Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
在螺纹上形成压力密封接头的管道螺纹第1部分:锥形外螺纹和平行内螺纹尺寸、公差和名称

GB/T 7306.1-2000

55°密封管螺纹第1部分:圆柱内螺纹与圆锥外螺纹
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads

KS B ISO 228-1(2022 Confirm)

압력 조임 이음쇠용 관나사－치수, 허용 오차 및 호칭
非螺纹压力密封接头的管螺纹第1部分:尺寸、公差和名称

KS B ISO 228-1(2017 Confirm)

압력 조임 이음쇠용 관나사－치수, 허용 오차 및 호칭
非紧压连接管螺纹第1部分:尺寸、公差和命名

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统