DL/T 1190-2012-额定电压10kV及以下绝缘穿刺线夹-国家数字标准馆

作废 DL/T 1190-2012

到馆阅读

收藏跟踪

购买正版

额定电压10kV及以下绝缘穿刺线夹 The insulation piercing connector for rated voltages up to 10kV

发布日期： 2012-08-23

实施日期： 2012-12-01

分类信息

发布单位或类别：中国-行业标准-电力

CCS分类： K10电工 - 电工材料和通用零件 - 电工材料和通用零件综合

ICS分类： 13.260环保、保健和安全 - 电击防护

关联关系

研制信息

归口单位：中国电力企业联合会

起草单位：浙江华电器材检测研究所、浙江左易电力设备有限公司

起草人：余虹云、朱承治

相似标准/计划/法规

DL/T 765.3-2004

额定电压10kV及以下架空绝缘导线金具
Overhead insulated conductor fittings of rated voltages up to 10kV

额定电压1kV（Um=1.2kV）到10kV（Um=12kV）挤包绝缘电力电缆绕包式终端
Taped terminations for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV)

额定电压1kV（Um=1.2 kV）到10kV（Um=12kV）纸绝缘电力电缆瓷套式终端
Porcelain bushing terminations for paper insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV)

JB/T 11167.2-2011

额定电压10kV（Um=12kV）至110kV（Um=126kV）交联聚乙烯绝缘大长度交流海底电缆及附件第2部分：额定电压10kV（Um=12kV）至110kV（Um=126kV）交联聚乙烯绝缘大长度交流海底电缆
Long AC submarine cables with cross-linked polyethylene insulation and their acessories for rated voltage from 10kV (Um=12kV) up to 110kV（Um=126kV）-Part 2:Long AC submarine cables with cross-linked polyethylene insulation for rated voltages from 10kV (U

KS C IEC 61238-1-2

전력 케이블용 압축 및 기계적 커넥터 — 제1-2부: 절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 이하 전력 케이블용 절연 관통 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-2部分:在绝缘导体上试验的额定电压1kV（Um=1.2kV）以下电力电缆用绝缘穿孔连接器的试验方法和要求

ANSI C119.5-2018

American National Standard for Electric Connectors-Insulation Piercing Connector Systems, Rated 600 Volts or Less (Low-Voltage Aerial Bundled Cables and Insulated and Non-Insulated Line Wires)
额定电压为600伏或以下的电连接器绝缘穿孔连接器系统美国国家标准（低压架空集束电缆以及绝缘和非绝缘电线）

额定电压1kV（Um=1.2 kV）到10kV（Um=12kV）挤包绝缘电力电缆热收缩式直通接头
Heat-shrinkable straight joints for extruded insulation power cables with rated voltages from 1kV（Um=1.2 kV）up to 10kV（Um=12kV）

BS EN IEC 61238-1-2-2019

Compression and mechanical connectors for power cables-Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on insulated conductors
电力电缆的压缩和机械连接器在绝缘导线上测试额定电压不超过1kV（U_m=1.2kV）的电力电缆用绝缘穿孔连接器的试验方法和要求

IEC 61238-1-2-2018

Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on insulated conductors
电力电缆的压缩和机械连接器.第1-2部分:在绝缘导体上试验的额定电压1kV（U_m=1.2kV）以下电力电缆绝缘穿孔连接器的试验方法和要求

JB/T 10739-2007

额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆可分离连接器
Separable connectors for extruded insulation power cables with rated voltages from 6kV(Um=7.2kV) up to 35kV(Um=40.5kV)

JB/T 11167.1-2011

额定电压10kV（Um=12kV）至110kV（Um=126kV）交联聚乙烯绝缘大长度交流海底电缆及附件第1部分：试验方法和要求
Long AC submarine cables with cross-linked polyethylene insulation and their acessories for rated voltage from 10kV (Um=12kV) up to 110kV（Um=126kV）-Part 1:Test methods and requirements

JB/T 11167.3-2011

额定电压10kV（Um=12kV）至110kV（Um=126kV）交联聚乙烯绝缘大长度交流海底电缆及附件第3部分：额定电压10kV（Um=12kV）至110kV（Um=126kV）交联聚乙烯绝缘大长度交流海底电缆附件
Long AC submarine cables with cross-linked polyethylene insulation and their acessories for rated voltage from 10kV (Um=12kV) up to 110kV（Um=126kV）-Part 3:Accessories for long AC submarine cables with cross-linked polyethylene insulation for rated volta

DIN EN IEC 61238-1-2

Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (U<(Index)m> = 1.2 kV) tested on insulated conductors (IEC 61238-1-2:2018); German version EN IEC 61238-1-2:2019
电力电缆用压缩连接器和机械连接器.第1-2部分:在绝缘导体上试验的额定电压1kV（U<（指数）m>=1.2kV）以下电力电缆用绝缘穿孔连接器的试验方法和要求（IEC 61238-1-2-2018）；德国版本EN IEC 61238-1-2:2019

KS C IEC 61238-1-1

전력 케이블용 압축 및 기계적 커넥터 — 제1-1부: 비절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 이하 전력 케이블용 압축 및 기계적 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（Um=1.2kV）以下电力电缆用挤压和机械连接器的试验方法和要求

BS EN IEC 61238-1-1-2019

Compression and mechanical connectors for power cables-Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on non-insulated conductors
电力电缆的压缩和机械连接器在非绝缘导体上测试额定电压不超过1kV（U_m=1.2kV）的电力电缆用压缩连接器和机械连接器的试验方法和要求

IEC 61238-1-1-2018

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U_m = 1,2 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（U_m=1.2kV）以下电力电缆用压缩和机械连接器的试验方法和要求

KS C IEC 61238-1-3

전력 케이블용 압축 및 기계적 커넥터 — 제1-3부: 비절연 도체에서 시험한 정격 전압 1 kV(Um = 1.2 kV) 초과 30 kV(Um = 36 kV) 이하 전력 케이블용 압축 및 기계적 커넥터의 시험방법 및 요구사항
电力电缆用压缩和机械连接器.第1-3部分:在非绝缘导体上试验的额定电压1kV（Um=1.2kV）以上至30kV（Um=36kV）电力电缆用挤压和机械连接器的试验方法和要求

BS EN IEC 61238-1-3-2019+A11-2019

Compression and mechanical connectors for power cables-Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U_m = 1,2 kV) up to 36 kV (U_m = 42 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器

IEC 61238-1-3-2018

Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (U_m = 1,2 kV) up to 30 kV (U_m = 36 kV) tested on non-insulated conductors
电力电缆用压缩和机械连接器.第1-3部分:在非绝缘导体上试验的额定电压大于1kV（U_m=1,2kV）至30kV（U_m=36kV）的电力电缆用压缩和机械连接器的试验方法和要求

DIN EN IEC 61238-1-1

Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (U<(Index)m> = 1.2 kV) tested on non-insulated conductors (IEC 61238-1-1:2018); German version EN IEC 61238-1-1:20
电力电缆用压缩和机械连接器.第1-1部分:在非绝缘导体上试验的额定电压1kV（U<（指数）m>=1.2kV）以下电力电缆用压缩和机械连接器的试验方法和要求（IEC 61238-1-1-2018）；德国版本EN IEC 61238-1-1:20

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统