ISO 13628-10:2005定义了按照统一标准和标准设计和制造的安全、尺寸和功能可互换粘结软管的技术要求。在适用的情况下，参考现有规范和标准，规定了粘结软管的设计、材料选择、制造、测试、标记和包装的最低要求。 ISO 13628-10:2005适用于粘结软管组件，由两端连接有端部配件的软管体段组成。 ISO 13628-10:2005适用于设计压力大于或等于1.5 MPa（15巴）的管道。ISO 13628-10:2005可用于设计压力较低的管道，但这些管道的要求尚未明确说明。 ISO 13628-10:2005不包括无粘结结构的软管，也不包括软管辅助部件，也不适用于节流和压井管线应用中使用的软管。 ISO 13628-10:2005适用于包括非金属材料在内的挠性管道- 金属加强层，尽管没有努力解决该产品的特定和独特技术方面，以及包括ISO 13628-2中所述材料或层结构的粘结施工管道。 ISO 13628-10:2005可适用于桩锤、天然气火炬、供水和喷射应用的挠性管道，但没有努力解决与这些要求相关的具体和独特的技术方面。

ISO 13628-10:2005 defines the technical requirements for safe, dimensionally and functionally interchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria. Minimum requirements are specified for the design, material selection, manufacture, testing, marking and packaging of bonded flexible pipes, with reference to existing codes and standards where applicable. ISO 13628-10:2005 applies to bonded flexible pipe assemblies, consisting of segments of flexible pipe body with end fittings attached to both ends. ISO 13628-10:2005 applies to pipes with a design pressure greater than or equal to 1,5 MPa (15 bar). ISO 13628-10:2005 can be used for lower design pressure pipes, though the requirements of these pipes have not been specifically addressed. ISO 13628-10:2005 does not cover flexible pipes of unbonded structure nor to flexible pipe ancillary components and does not apply to flexible pipes for use in choke and kill line applications. ISO 13628-10:2005 can be applied to flexible pipes that include non-metallic reinforcing layers, though no effort was made to address the specific and unique technological aspects of this product, and to a bonded construction pipe that includes a material or layer construction that is covered in ISO 13628-2. ISO 13628-10:2005 can be applied to flexible pipes for pile hammer, gas flare, water supply and jetting applications, though no effort was made to address the specific and unique technological aspects relating to each of these requirements.